MakeItFrom.com
Menu (ESC)

EN 1.5514 Steel vs. EN 1.4547 Stainless Steel

Both EN 1.5514 steel and EN 1.4547 stainless steel are iron alloys. They have 55% of their average alloy composition in common. There are 25 material properties with values for both materials. Properties with values for just one material (10, in this case) are not shown.

For each property being compared, the top bar is EN 1.5514 steel and the bottom bar is EN 1.4547 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 140 to 170
230
Elastic (Young's, Tensile) Modulus, GPa 190
200
Poisson's Ratio 0.29
0.28
Shear Modulus, GPa 73
80
Tensile Strength: Ultimate (UTS), MPa 470 to 1680
750

Thermal Properties

Latent Heat of Fusion, J/g 250
300
Maximum Temperature: Mechanical, °C 400
1090
Melting Completion (Liquidus), °C 1460
1470
Melting Onset (Solidus), °C 1420
1420
Specific Heat Capacity, J/kg-K 470
460
Thermal Conductivity, W/m-K 49
14
Thermal Expansion, µm/m-K 13
17

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.1
2.0
Electrical Conductivity: Equal Weight (Specific), % IACS 8.2
2.3

Otherwise Unclassified Properties

Base Metal Price, % relative 1.9
28
Density, g/cm3 7.8
8.0
Embodied Carbon, kg CO2/kg material 1.4
5.6
Embodied Energy, MJ/kg 19
75
Embodied Water, L/kg 47
190

Common Calculations

Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 24
24
Strength to Weight: Axial, points 17 to 60
26
Strength to Weight: Bending, points 17 to 40
23
Thermal Diffusivity, mm2/s 13
3.8
Thermal Shock Resistance, points 14 to 50
16

Alloy Composition

Boron (B), % 0.00080 to 0.0050
0
Carbon (C), % 0.3 to 0.35
0 to 0.020
Chromium (Cr), % 0 to 0.3
19.5 to 20.5
Copper (Cu), % 0 to 0.25
0.5 to 1.0
Iron (Fe), % 97.8 to 99.099
51 to 56.3
Manganese (Mn), % 0.6 to 0.9
0 to 1.0
Molybdenum (Mo), % 0
6.0 to 7.0
Nickel (Ni), % 0
17.5 to 18.5
Nitrogen (N), % 0
0.18 to 0.25
Phosphorus (P), % 0 to 0.025
0 to 0.030
Silicon (Si), % 0 to 0.3
0 to 0.7
Sulfur (S), % 0 to 0.025
0 to 0.010