MakeItFrom.com
Menu (ESC)

EN 1.6580 Steel vs. 5657 Aluminum

EN 1.6580 steel belongs to the iron alloys classification, while 5657 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.6580 steel and the bottom bar is 5657 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 220 to 350
40 to 50
Elastic (Young's, Tensile) Modulus, GPa 190
68
Elongation at Break, % 11 to 19
6.6 to 15
Fatigue Strength, MPa 310 to 610
74 to 88
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 73
26
Shear Strength, MPa 450 to 700
92 to 110
Tensile Strength: Ultimate (UTS), MPa 720 to 1170
150 to 200
Tensile Strength: Yield (Proof), MPa 460 to 990
140 to 170

Thermal Properties

Latent Heat of Fusion, J/g 250
400
Maximum Temperature: Mechanical, °C 450
180
Melting Completion (Liquidus), °C 1460
660
Melting Onset (Solidus), °C 1420
640
Specific Heat Capacity, J/kg-K 470
900
Thermal Conductivity, W/m-K 40
210
Thermal Expansion, µm/m-K 13
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.8
54
Electrical Conductivity: Equal Weight (Specific), % IACS 8.9
180

Otherwise Unclassified Properties

Base Metal Price, % relative 4.3
9.5
Density, g/cm3 7.9
2.7
Embodied Carbon, kg CO2/kg material 1.8
8.4
Embodied Energy, MJ/kg 23
160
Embodied Water, L/kg 59
1200

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 120 to 130
9.7 to 27
Resilience: Unit (Modulus of Resilience), kJ/m3 560 to 2590
140 to 200
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 24
50
Strength to Weight: Axial, points 26 to 41
15 to 20
Strength to Weight: Bending, points 23 to 31
23 to 28
Thermal Diffusivity, mm2/s 11
84
Thermal Shock Resistance, points 21 to 34
6.7 to 8.6

Alloy Composition

Aluminum (Al), % 0
98.5 to 99.4
Carbon (C), % 0.26 to 0.34
0
Chromium (Cr), % 1.8 to 2.2
0
Copper (Cu), % 0
0 to 0.1
Gallium (Ga), % 0
0 to 0.030
Iron (Fe), % 93.7 to 95.5
0 to 0.1
Magnesium (Mg), % 0
0.6 to 1.0
Manganese (Mn), % 0.3 to 0.6
0 to 0.030
Molybdenum (Mo), % 0.3 to 0.5
0
Nickel (Ni), % 1.8 to 2.2
0
Phosphorus (P), % 0 to 0.035
0
Silicon (Si), % 0 to 0.4
0 to 0.080
Sulfur (S), % 0 to 0.035
0
Vanadium (V), % 0
0 to 0.050
Zinc (Zn), % 0
0 to 0.050
Residuals, % 0
0 to 0.050