MakeItFrom.com
Menu (ESC)

EN 1.6771 Steel vs. 224.0 Aluminum

EN 1.6771 steel belongs to the iron alloys classification, while 224.0 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.6771 steel and the bottom bar is 224.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 190
71
Elongation at Break, % 8.0 to 8.7
4.0 to 10
Fatigue Strength, MPa 440 to 680
86 to 120
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 73
27
Tensile Strength: Ultimate (UTS), MPa 930 to 1180
380 to 420
Tensile Strength: Yield (Proof), MPa 740 to 1140
280 to 330

Thermal Properties

Latent Heat of Fusion, J/g 250
390
Maximum Temperature: Mechanical, °C 440
220
Melting Completion (Liquidus), °C 1460
650
Melting Onset (Solidus), °C 1420
550
Specific Heat Capacity, J/kg-K 470
870
Thermal Conductivity, W/m-K 46
120
Thermal Expansion, µm/m-K 13
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 8.0
32
Electrical Conductivity: Equal Weight (Specific), % IACS 9.2
95

Otherwise Unclassified Properties

Base Metal Price, % relative 5.0
11
Density, g/cm3 7.9
3.0
Embodied Carbon, kg CO2/kg material 1.9
8.3
Embodied Energy, MJ/kg 25
160
Embodied Water, L/kg 58
1150

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 75 to 93
16 to 35
Resilience: Unit (Modulus of Resilience), kJ/m3 1460 to 3450
540 to 770
Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 24
45
Strength to Weight: Axial, points 33 to 41
35 to 38
Strength to Weight: Bending, points 27 to 31
38 to 41
Thermal Diffusivity, mm2/s 13
47
Thermal Shock Resistance, points 27 to 35
17 to 18

Alloy Composition

Aluminum (Al), % 0
93 to 95.2
Carbon (C), % 0.27 to 0.33
0
Chromium (Cr), % 0.8 to 1.2
0
Copper (Cu), % 0
4.5 to 5.5
Iron (Fe), % 92.2 to 95
0 to 0.1
Manganese (Mn), % 0.6 to 1.0
0.2 to 0.5
Molybdenum (Mo), % 0.3 to 0.6
0
Nickel (Ni), % 3.0 to 4.0
0
Phosphorus (P), % 0 to 0.030
0
Silicon (Si), % 0 to 0.6
0 to 0.060
Sulfur (S), % 0 to 0.020
0
Titanium (Ti), % 0
0 to 0.35
Vanadium (V), % 0
0.050 to 0.15
Zirconium (Zr), % 0
0.1 to 0.25
Residuals, % 0
0 to 0.1

Comparable Variants