MakeItFrom.com
Menu (ESC)

EN 1.7039 Steel vs. 6025 Aluminum

EN 1.7039 steel belongs to the iron alloys classification, while 6025 aluminum belongs to the aluminum alloys. There are 24 material properties with values for both materials. Properties with values for just one material (6, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.7039 steel and the bottom bar is 6025 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 190
70
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 73
26
Tensile Strength: Ultimate (UTS), MPa 530 to 1850
190 to 240

Thermal Properties

Latent Heat of Fusion, J/g 250
410
Maximum Temperature: Mechanical, °C 420
160
Melting Completion (Liquidus), °C 1460
650
Melting Onset (Solidus), °C 1420
550
Specific Heat Capacity, J/kg-K 470
900
Thermal Conductivity, W/m-K 46
130
Thermal Expansion, µm/m-K 13
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.3
33
Electrical Conductivity: Equal Weight (Specific), % IACS 8.4
110

Otherwise Unclassified Properties

Base Metal Price, % relative 2.3
9.5
Density, g/cm3 7.8
2.8
Embodied Carbon, kg CO2/kg material 1.4
8.5
Embodied Energy, MJ/kg 19
150
Embodied Water, L/kg 51
1160

Common Calculations

Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 24
50
Strength to Weight: Axial, points 19 to 65
19 to 24
Strength to Weight: Bending, points 19 to 43
26 to 31
Thermal Diffusivity, mm2/s 12
54
Thermal Shock Resistance, points 16 to 54
8.2 to 10

Alloy Composition

Aluminum (Al), % 0
91.7 to 96.3
Carbon (C), % 0.38 to 0.45
0
Chromium (Cr), % 0.9 to 1.2
0 to 0.2
Copper (Cu), % 0 to 0.25
0.2 to 0.7
Iron (Fe), % 96.8 to 98.1
0 to 0.7
Magnesium (Mg), % 0
2.1 to 3.0
Manganese (Mn), % 0.6 to 0.9
0.6 to 1.4
Phosphorus (P), % 0 to 0.025
0
Silicon (Si), % 0 to 0.3
0.8 to 1.5
Sulfur (S), % 0.020 to 0.040
0
Titanium (Ti), % 0
0 to 0.2
Zinc (Zn), % 0
0 to 0.5
Residuals, % 0
0 to 0.15