MakeItFrom.com
Menu (ESC)

EN 1.8507 Steel vs. 1080A Aluminum

EN 1.8507 steel belongs to the iron alloys classification, while 1080A aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.8507 steel and the bottom bar is 1080A aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 270
18 to 40
Elastic (Young's, Tensile) Modulus, GPa 190
68
Elongation at Break, % 16
2.3 to 34
Fatigue Strength, MPa 440
18 to 50
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 72
26
Shear Strength, MPa 550
49 to 81
Tensile Strength: Ultimate (UTS), MPa 900
74 to 140
Tensile Strength: Yield (Proof), MPa 670
17 to 120

Thermal Properties

Latent Heat of Fusion, J/g 250
400
Maximum Temperature: Mechanical, °C 430
170
Melting Completion (Liquidus), °C 1450
640
Melting Onset (Solidus), °C 1410
640
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 41
230
Thermal Expansion, µm/m-K 13
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.4
62
Electrical Conductivity: Equal Weight (Specific), % IACS 8.5
200

Otherwise Unclassified Properties

Base Metal Price, % relative 2.5
9.5
Density, g/cm3 7.8
2.7
Embodied Carbon, kg CO2/kg material 1.6
8.3
Embodied Energy, MJ/kg 21
160
Embodied Water, L/kg 63
1200

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 130
3.1 to 19
Resilience: Unit (Modulus of Resilience), kJ/m3 1210
2.1 to 100
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 24
50
Strength to Weight: Axial, points 32
7.6 to 15
Strength to Weight: Bending, points 27
14 to 22
Thermal Diffusivity, mm2/s 11
94
Thermal Shock Resistance, points 26
3.3 to 6.4

Alloy Composition

Aluminum (Al), % 0.8 to 1.2
99.8 to 100
Carbon (C), % 0.3 to 0.37
0
Chromium (Cr), % 1.0 to 1.3
0
Copper (Cu), % 0
0 to 0.030
Gallium (Ga), % 0
0 to 0.030
Iron (Fe), % 96.1 to 97.7
0 to 0.15
Magnesium (Mg), % 0
0 to 0.020
Manganese (Mn), % 0.4 to 0.7
0 to 0.020
Molybdenum (Mo), % 0.15 to 0.25
0
Phosphorus (P), % 0 to 0.025
0
Silicon (Si), % 0 to 0.4
0 to 0.15
Sulfur (S), % 0 to 0.035
0
Titanium (Ti), % 0
0 to 0.020
Zinc (Zn), % 0
0 to 0.060