MakeItFrom.com
Menu (ESC)

EN 2.4816 Nickel vs. ZK60A Magnesium

EN 2.4816 nickel belongs to the nickel alloys classification, while ZK60A magnesium belongs to the magnesium alloys. There are 30 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 2.4816 nickel and the bottom bar is ZK60A magnesium.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 190
46
Elongation at Break, % 34
4.5 to 9.9
Fatigue Strength, MPa 200
150 to 180
Poisson's Ratio 0.29
0.29
Shear Modulus, GPa 74
18
Shear Strength, MPa 470
170 to 190
Tensile Strength: Ultimate (UTS), MPa 700
320 to 330
Tensile Strength: Yield (Proof), MPa 270
230 to 250

Thermal Properties

Latent Heat of Fusion, J/g 310
330
Maximum Temperature: Mechanical, °C 1150
120
Melting Completion (Liquidus), °C 1370
600
Melting Onset (Solidus), °C 1320
550
Specific Heat Capacity, J/kg-K 460
960
Thermal Conductivity, W/m-K 15
120
Thermal Expansion, µm/m-K 13
26

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 1.7
29 to 30
Electrical Conductivity: Equal Weight (Specific), % IACS 1.8
140

Otherwise Unclassified Properties

Base Metal Price, % relative 55
13
Density, g/cm3 8.5
1.9
Embodied Carbon, kg CO2/kg material 9.0
23
Embodied Energy, MJ/kg 130
160
Embodied Water, L/kg 260
940

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 190
14 to 29
Resilience: Unit (Modulus of Resilience), kJ/m3 190
570 to 690
Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 23
63
Strength to Weight: Axial, points 23
47 to 49
Strength to Weight: Bending, points 21
55 to 56
Thermal Diffusivity, mm2/s 3.8
66
Thermal Shock Resistance, points 20
19 to 20

Alloy Composition

Aluminum (Al), % 0 to 0.3
0
Carbon (C), % 0.050 to 0.1
0
Chromium (Cr), % 14 to 17
0
Copper (Cu), % 0 to 0.5
0
Iron (Fe), % 6.0 to 10
0
Magnesium (Mg), % 0
92.5 to 94.8
Manganese (Mn), % 0 to 1.0
0
Nickel (Ni), % 72 to 80
0
Phosphorus (P), % 0 to 0.020
0
Silicon (Si), % 0 to 0.5
0
Sulfur (S), % 0 to 0.015
0
Titanium (Ti), % 0 to 0.3
0
Zinc (Zn), % 0
4.8 to 6.2
Zirconium (Zr), % 0
0.45 to 1.0
Residuals, % 0
0 to 0.3