MakeItFrom.com
Menu (ESC)

EN AC-44400 Aluminum vs. N08810 Stainless Steel

EN AC-44400 aluminum belongs to the aluminum alloys classification, while N08810 stainless steel belongs to the iron alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN AC-44400 aluminum and the bottom bar is N08810 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 71
200
Elongation at Break, % 4.1
33
Fatigue Strength, MPa 79
160
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 27
77
Tensile Strength: Ultimate (UTS), MPa 210
520
Tensile Strength: Yield (Proof), MPa 110
200

Thermal Properties

Latent Heat of Fusion, J/g 540
300
Maximum Temperature: Mechanical, °C 170
1100
Melting Completion (Liquidus), °C 600
1400
Melting Onset (Solidus), °C 590
1350
Specific Heat Capacity, J/kg-K 900
480
Thermal Conductivity, W/m-K 140
12
Thermal Expansion, µm/m-K 22
14

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 33
1.7
Electrical Conductivity: Equal Weight (Specific), % IACS 110
1.9

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
30
Density, g/cm3 2.6
8.0
Embodied Carbon, kg CO2/kg material 7.8
5.3
Embodied Energy, MJ/kg 150
76
Embodied Water, L/kg 1080
200

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 7.3
140
Resilience: Unit (Modulus of Resilience), kJ/m3 85
100
Stiffness to Weight: Axial, points 15
14
Stiffness to Weight: Bending, points 54
24
Strength to Weight: Axial, points 23
18
Strength to Weight: Bending, points 31
18
Thermal Diffusivity, mm2/s 60
3.0
Thermal Shock Resistance, points 9.8
13

Alloy Composition

Aluminum (Al), % 87.1 to 92
0.15 to 0.6
Carbon (C), % 0
0.050 to 0.1
Chromium (Cr), % 0
19 to 23
Copper (Cu), % 0 to 0.1
0 to 0.75
Iron (Fe), % 0 to 0.65
39.5 to 50.7
Lead (Pb), % 0 to 0.050
0
Magnesium (Mg), % 0 to 0.1
0
Manganese (Mn), % 0 to 0.5
0 to 1.5
Nickel (Ni), % 0 to 0.050
30 to 35
Phosphorus (P), % 0
0 to 0.045
Silicon (Si), % 8.0 to 11
0 to 1.0
Sulfur (S), % 0
0 to 0.015
Tin (Sn), % 0 to 0.050
0
Titanium (Ti), % 0 to 0.15
0.15 to 0.6
Zinc (Zn), % 0 to 0.15
0
Residuals, % 0 to 0.15
0