MakeItFrom.com
Menu (ESC)

EN AC-45400 Aluminum vs. SAE-AISI S1 Steel

EN AC-45400 aluminum belongs to the aluminum alloys classification, while SAE-AISI S1 steel belongs to the iron alloys. There are 23 material properties with values for both materials. Properties with values for just one material (8, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN AC-45400 aluminum and the bottom bar is SAE-AISI S1 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 72
190
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 27
73
Tensile Strength: Ultimate (UTS), MPa 260
690 to 1840

Thermal Properties

Latent Heat of Fusion, J/g 470
260
Melting Completion (Liquidus), °C 630
1500
Melting Onset (Solidus), °C 560
1450
Specific Heat Capacity, J/kg-K 880
470
Thermal Conductivity, W/m-K 140
41
Thermal Expansion, µm/m-K 22
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 30
7.7
Electrical Conductivity: Equal Weight (Specific), % IACS 95
8.7

Otherwise Unclassified Properties

Base Metal Price, % relative 10
8.0
Density, g/cm3 2.8
8.0
Embodied Carbon, kg CO2/kg material 7.8
2.6
Embodied Energy, MJ/kg 150
37
Embodied Water, L/kg 1100
56

Common Calculations

Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 49
24
Strength to Weight: Axial, points 25
24 to 64
Strength to Weight: Bending, points 32
22 to 42
Thermal Diffusivity, mm2/s 54
11
Thermal Shock Resistance, points 12
21 to 56

Alloy Composition

Aluminum (Al), % 88.4 to 92.9
0
Carbon (C), % 0
0.4 to 0.55
Chromium (Cr), % 0
1.0 to 1.8
Copper (Cu), % 2.6 to 3.6
0 to 0.25
Iron (Fe), % 0 to 0.6
91.6 to 96.7
Lead (Pb), % 0 to 0.1
0
Magnesium (Mg), % 0 to 0.050
0
Manganese (Mn), % 0 to 0.55
0.1 to 0.4
Molybdenum (Mo), % 0
0 to 0.5
Nickel (Ni), % 0 to 0.1
0 to 0.3
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 4.5 to 6.0
0.15 to 1.2
Sulfur (S), % 0
0 to 0.030
Tin (Sn), % 0 to 0.050
0
Titanium (Ti), % 0 to 0.25
0
Tungsten (W), % 0
1.5 to 3.0
Vanadium (V), % 0
0.15 to 0.3
Zinc (Zn), % 0 to 0.2
0
Residuals, % 0 to 0.15
0