ECO Rubber vs. PEEK
ECO rubber belongs to the thermoset elastomers (rubber) classification, while PEEK belongs to the thermoplastics. There are 11 material properties with values for both materials. Properties with values for just one material (20, in this case) are not shown.
For each property being compared, the top bar is ECO rubber and the bottom bar is PEEK.
Metric UnitsUS Customary Units
Mechanical Properties
| Compressive (Crushing) Strength, MPa | 21 | |
| 120 to 300 |
| Elastic (Young's, Tensile) Modulus, GPa | 0.0075 | |
| 4.0 to 24 |
| Elongation at Break, % | 440 | |
| 1.6 to 43 |
| Tensile Strength: Ultimate (UTS), MPa | 16 | |
| 97 to 200 |
Thermal Properties
| Maximum Temperature: Mechanical, °C | 130 | |
| 330 |
| Thermal Expansion, µm/m-K | 650 | |
| 15 to 52 |
Otherwise Unclassified Properties
| Density, g/cm3 | 1.5 | |
| 1.3 to 1.5 |
Common Calculations
| Stiffness to Weight: Axial, points | 0.0029 | |
| 1.5 to 10 |
| Stiffness to Weight: Bending, points | 4.5 | |
| 36 to 73 |
| Strength to Weight: Axial, points | 3.0 | |
| 20 to 41 |
| Strength to Weight: Bending, points | 9.5 | |
| 36 to 55 |