Epoxy vs. PETG
Epoxy belongs to the thermoset plastics classification, while PETG belongs to the thermoplastics. There are 15 material properties with values for both materials. Properties with values for just one material (20, in this case) are not shown.
For each property being compared, the top bar is epoxy and the bottom bar is PETG.
Metric UnitsUS Customary Units
Mechanical Properties
| Elastic (Young's, Tensile) Modulus, GPa | 2.4 | |
| 2.2 |
| Tensile Strength: Ultimate (UTS), MPa | 67 | |
| 53 |
Thermal Properties
| Glass Transition Temperature, °C | 120 | |
| 81 |
| Specific Heat Capacity, J/kg-K | 1500 | |
| 1200 |
| Thermal Conductivity, W/m-K | 0.2 | |
| 0.29 |
| Thermal Expansion, µm/m-K | 100 | |
| 68 |
Electrical Properties
| Dielectric Strength (Breakdown Potential), kV/mm | 16 | |
| 16 |
Otherwise Unclassified Properties
| Density, g/cm3 | 1.3 | |
| 1.3 |
| Refractive Index | 1.6 | |
| 1.6 |
Common Calculations
| Stiffness to Weight: Axial, points | 1.0 | |
| 1.0 |
| Stiffness to Weight: Bending, points | 34 | |
| 34 |
| Strength to Weight: Axial, points | 14 | |
| 12 |
| Strength to Weight: Bending, points | 28 | |
| 25 |
| Thermal Diffusivity, mm2/s | 0.1 | |
| 0.19 |
| Thermal Shock Resistance, points | 20 | |
| 25 |