EPDM Rubber vs. PET
EPDM rubber belongs to the thermoset elastomers (rubber) classification, while PET belongs to the thermoplastics. There are 9 material properties with values for both materials. Properties with values for just one material (12, in this case) are not shown.
For each property being compared, the top bar is EPDM rubber and the bottom bar is PET.
Metric UnitsUS Customary Units
Material Properties
| Density, g/cm3 | 1.0 | |
| 1.4 to 1.6 |
| Elongation at Break, % | 400 | |
| 2.5 to 70 |
| Glass Transition Temperature, °C | -60 | |
| 70 |
| Maximum Temperature: Decomposition, °C | 290 | |
| 390 |
| Maximum Temperature: Mechanical, °C | 160 | |
| 80 |
| Specific Heat Capacity, J/kg-K | 2000 | |
| 1000 to 1150 |
| Strength to Weight: Axial, points | 3.6 | |
| 12 to 27 |
| Strength to Weight: Bending, points | 12 | |
| 25 to 41 |
| Tensile Strength: Ultimate (UTS), MPa | 13 | |
| 60 to 140 |