MakeItFrom.com
Menu (ESC)

Grade M30C Nickel vs. 328.0 Aluminum

Grade M30C nickel belongs to the nickel alloys classification, while 328.0 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is grade M30C nickel and the bottom bar is 328.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 160
72
Elongation at Break, % 29
1.6 to 2.1
Fatigue Strength, MPa 170
55 to 80
Poisson's Ratio 0.32
0.33
Shear Modulus, GPa 61
27
Tensile Strength: Ultimate (UTS), MPa 510
200 to 270
Tensile Strength: Yield (Proof), MPa 250
120 to 170

Thermal Properties

Latent Heat of Fusion, J/g 290
510
Maximum Temperature: Mechanical, °C 900
180
Melting Completion (Liquidus), °C 1290
620
Melting Onset (Solidus), °C 1240
560
Specific Heat Capacity, J/kg-K 430
890
Thermal Conductivity, W/m-K 22
120
Thermal Expansion, µm/m-K 13
22

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 3.3
30
Electrical Conductivity: Equal Weight (Specific), % IACS 3.4
99

Otherwise Unclassified Properties

Base Metal Price, % relative 60
10
Density, g/cm3 8.8
2.7
Embodied Carbon, kg CO2/kg material 9.5
7.8
Embodied Energy, MJ/kg 140
140
Embodied Water, L/kg 250
1070

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 120
2.8 to 5.0
Resilience: Unit (Modulus of Resilience), kJ/m3 200
92 to 200
Stiffness to Weight: Axial, points 10
15
Stiffness to Weight: Bending, points 21
51
Strength to Weight: Axial, points 16
21 to 28
Strength to Weight: Bending, points 16
28 to 34
Thermal Diffusivity, mm2/s 5.7
50
Thermal Shock Resistance, points 18
9.2 to 12

Alloy Composition


Deprecated: Automatic conversion of false to array is deprecated in /home/public/compare.php on line 460
Aluminum (Al), % 0
84.5 to 91.1
Carbon (C), % 0 to 0.3
0
Chromium (Cr), % 0
0 to 0.35
Copper (Cu), % 26 to 33
1.0 to 2.0
Iron (Fe), % 0 to 3.5
0 to 1.0
Magnesium (Mg), % 0
0.2 to 0.6
Manganese (Mn), % 0 to 1.5
0.2 to 0.6
Nickel (Ni), % 56.6 to 72
0 to 0.25
Niobium (Nb), % 1.0 to 3.0
0
Phosphorus (P), % 0 to 0.030
0
Silicon (Si), % 1.0 to 2.0
7.5 to 8.5
Sulfur (S), % 0 to 0.030
0
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0
0 to 1.5
Residuals, % 0
0 to 0.5