MakeItFrom.com
Menu (ESC)

Grade VDCrV Steel vs. 296.0 Aluminum

Grade VDCrV steel belongs to the iron alloys classification, while 296.0 aluminum belongs to the aluminum alloys. There are 25 material properties with values for both materials. Properties with values for just one material (6, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is grade VDCrV steel and the bottom bar is 296.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 520
75 to 90
Elastic (Young's, Tensile) Modulus, GPa 190
72
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 80
27
Tensile Strength: Ultimate (UTS), MPa 1730
260 to 270

Thermal Properties

Latent Heat of Fusion, J/g 250
420
Maximum Temperature: Mechanical, °C 410
170
Melting Completion (Liquidus), °C 1450
630
Melting Onset (Solidus), °C 1410
540
Specific Heat Capacity, J/kg-K 470
870
Thermal Conductivity, W/m-K 49
130 to 150
Thermal Expansion, µm/m-K 13
22

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.1
33 to 37
Electrical Conductivity: Equal Weight (Specific), % IACS 8.2
99 to 110

Otherwise Unclassified Properties

Base Metal Price, % relative 2.1
11
Density, g/cm3 7.8
3.0
Embodied Carbon, kg CO2/kg material 1.9
7.8
Embodied Energy, MJ/kg 26
150
Embodied Water, L/kg 49
1110

Common Calculations

Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 24
46
Strength to Weight: Axial, points 61
24 to 25
Strength to Weight: Bending, points 41
30 to 31
Thermal Diffusivity, mm2/s 13
51 to 56
Thermal Shock Resistance, points 51
12

Alloy Composition

Aluminum (Al), % 0
89 to 94
Carbon (C), % 0.62 to 0.72
0
Chromium (Cr), % 0.4 to 0.6
0
Copper (Cu), % 0 to 0.060
4.0 to 5.0
Iron (Fe), % 97.8 to 98.8
0 to 1.2
Magnesium (Mg), % 0
0 to 0.050
Manganese (Mn), % 0.5 to 0.9
0 to 0.35
Nickel (Ni), % 0
0 to 0.35
Phosphorus (P), % 0 to 0.025
0
Silicon (Si), % 0.15 to 0.3
2.0 to 3.0
Sulfur (S), % 0 to 0.020
0
Titanium (Ti), % 0
0 to 0.25
Vanadium (V), % 0.15 to 0.25
0
Zinc (Zn), % 0
0 to 0.5
Residuals, % 0
0 to 0.35