HDPE vs. Phenolic
HDPE belongs to the thermoplastics classification, while phenolic belongs to the thermoset plastics. There are 7 material properties with values for both materials. Properties with values for just one material (17, in this case) are not shown.
For each property being compared, the top bar is HDPE and the bottom bar is phenolic.
Metric UnitsUS Customary Units
Material Properties
| Density, g/cm3 | 1.0 to 1.3 | |
| 1.3 |
| Elongation at Break, % | 2.5 to 100 | |
| 2.0 |
| Maximum Temperature: Mechanical, °C | 90 | |
| 150 |
| Specific Heat Capacity, J/kg-K | 1330 to 2400 | |
| 1400 |
| Strength to Weight: Axial, points | 6.9 to 17 | |
| 10 |
| Strength to Weight: Bending, points | 19 to 32 | |
| 23 |
| Tensile Strength: Ultimate (UTS), MPa | 24 to 80 | |
| 48 |