MakeItFrom.com
Menu (ESC)

Nickel 200 vs. SAE-AISI T1 Steel

Nickel 200 belongs to the nickel alloys classification, while SAE-AISI T1 steel belongs to the iron alloys. There are 21 material properties with values for both materials. Properties with values for just one material (12, in this case) are not shown.

For each property being compared, the top bar is nickel 200 and the bottom bar is SAE-AISI T1 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 180
200
Poisson's Ratio 0.31
0.29
Shear Modulus, GPa 70
80
Tensile Strength: Ultimate (UTS), MPa 420 to 540
770 to 2130

Thermal Properties

Latent Heat of Fusion, J/g 290
240
Melting Completion (Liquidus), °C 1460
1810
Melting Onset (Solidus), °C 1440
1750
Specific Heat Capacity, J/kg-K 450
410
Thermal Conductivity, W/m-K 69
20
Thermal Expansion, µm/m-K 13
12

Otherwise Unclassified Properties

Base Metal Price, % relative 65
45
Density, g/cm3 8.9
9.3
Embodied Carbon, kg CO2/kg material 11
8.2
Embodied Energy, MJ/kg 150
130
Embodied Water, L/kg 230
90

Common Calculations

Stiffness to Weight: Axial, points 11
12
Stiffness to Weight: Bending, points 21
21
Strength to Weight: Axial, points 13 to 17
23 to 64
Strength to Weight: Bending, points 14 to 17
20 to 40
Thermal Diffusivity, mm2/s 17
5.2
Thermal Shock Resistance, points 13 to 16
23 to 64

Alloy Composition

Carbon (C), % 0 to 0.15
0.65 to 0.8
Chromium (Cr), % 0
3.8 to 4.5
Copper (Cu), % 0 to 0.25
0 to 0.25
Iron (Fe), % 0 to 0.4
73.2 to 77.2
Manganese (Mn), % 0 to 0.35
0.1 to 0.4
Nickel (Ni), % 99 to 100
0 to 0.3
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 0 to 0.35
0.2 to 0.4
Sulfur (S), % 0 to 0.010
0 to 0.030
Tungsten (W), % 0
17.3 to 18.8
Vanadium (V), % 0
0.9 to 1.3

Comparable Variants