PFA vs. PMMA
Both PFA and PMMA are thermoplastics. There are 15 material properties with values for both materials. Properties with values for just one material (19, in this case) are not shown.
For each property being compared, the top bar is PFA and the bottom bar is PMMA.
Metric UnitsUS Customary Units
Mechanical Properties
| Elongation at Break, % | 300 | |
| 4.0 |
| Tensile Strength: Ultimate (UTS), MPa | 30 | |
| 71 |
Thermal Properties
| Heat Deflection Temperature At 1.82 MPa (264 psi), °C | 50 | |
| 96 |
| Melting Onset (Solidus), °C | 300 | |
| 180 |
| Specific Heat Capacity, J/kg-K | 1000 | |
| 1260 |
| Thermal Conductivity, W/m-K | 0.25 | |
| 0.19 |
| Thermal Expansion, µm/m-K | 120 | |
| 76 |
Electrical Properties
| Dielectric Constant (Relative Permittivity) At 1 Hz | 2.1 | |
| 3.6 |
| Dielectric Strength (Breakdown Potential), kV/mm | 22 | |
| 30 |
Otherwise Unclassified Properties
| Density, g/cm3 | 2.2 | |
| 1.2 |
| Limiting Oxygen Index (LOI), % | 80 | |
| 17 |
| Refractive Index | 1.4 | |
| 1.5 |
Common Calculations
| Strength to Weight: Axial, points | 3.9 | |
| 17 |
| Strength to Weight: Bending, points | 10 | |
| 32 |
| Thermal Diffusivity, mm2/s | 0.12 | |
| 0.13 |