ACM Rubber vs. HDPE
ACM rubber belongs to the thermoset elastomers (rubber) classification, while HDPE belongs to the thermoplastics. There are 6 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown.
For each property being compared, the top bar is ACM rubber and the bottom bar is HDPE.
Metric UnitsUS Customary Units
Material Properties
| Density, g/cm3 | 1.3 | |
| 1.0 to 1.3 |
| Elongation at Break, % | 280 | |
| 2.5 to 100 |
| Maximum Temperature: Mechanical, °C | 160 | |
| 90 |
| Strength to Weight: Axial, points | 2.7 | |
| 6.9 to 17 |
| Strength to Weight: Bending, points | 9.3 | |
| 19 to 32 |
| Tensile Strength: Ultimate (UTS), MPa | 13 | |
| 24 to 80 |