PA 11 vs. Silicone Plastic
PA 11 belongs to the thermoplastics classification, while silicone plastic belongs to the thermoset plastics. There are 10 material properties with values for both materials. Properties with values for just one material (9, in this case) are not shown.
For each property being compared, the top bar is PA 11 and the bottom bar is silicone plastic.
Metric UnitsUS Customary Units
Material Properties
| Density, g/cm3 | 1.0 | |
| 1.9 |
| Elastic (Young's, Tensile) Modulus, GPa | 0.4 to 1.3 | |
| 9.0 |
| Specific Heat Capacity, J/kg-K | 1740 | |
| 850 |
| Stiffness to Weight: Axial, points | 0.22 to 0.71 | |
| 2.6 |
| Stiffness to Weight: Bending, points | 24 to 36 | |
| 36 |
| Strength to Weight: Axial, points | 6.7 to 14 | |
| 5.5 |
| Strength to Weight: Bending, points | 18 to 30 | |
| 13 |
| Tensile Strength: Ultimate (UTS), MPa | 25 to 51 | |
| 38 |
| Thermal Conductivity, W/m-K | 0.28 | |
| 0.35 |
| Thermal Diffusivity, mm2/s | 0.16 | |
| 0.22 |