PA 6/12 vs. PTFE
Both PA 6/12 and PTFE are thermoplastics. There are 11 material properties with values for both materials. Properties with values for just one material (15, in this case) are not shown.
For each property being compared, the top bar is PA 6/12 and the bottom bar is PTFE.
Metric UnitsUS Customary Units
Mechanical Properties
| Elongation at Break, % | 30 to 120 | |
| 75 to 300 |
| Flexural Modulus, GPa | 1.2 to 2.2 | |
| 0.4 to 1.3 |
| Flexural Strength, MPa | 45 to 64 | |
| 13 to 50 |
| Tensile Strength: Ultimate (UTS), MPa | 40 to 58 | |
| 13 to 25 |
Thermal Properties
| Melting Onset (Solidus), °C | 210 | |
| 330 to 340 |
| Thermal Conductivity, W/m-K | 0.22 | |
| 0.24 to 0.65 |
Otherwise Unclassified Properties
| Density, g/cm3 | 1.1 | |
| 2.1 to 2.3 |
| Limiting Oxygen Index (LOI), % | 25 | |
| 90 |
| Water Absorption After 24 Hours, % | 0.25 | |
| 0.0093 to 0.050 |
Common Calculations
| Strength to Weight: Axial, points | 10 to 15 | |
| 1.7 to 3.2 |
| Strength to Weight: Bending, points | 25 to 31 | |
| 5.7 to 8.7 |