PBI vs. SBR Rubber
PBI belongs to the thermoset plastics classification, while SBR rubber belongs to the thermoset elastomers (rubber). There are 11 material properties with values for both materials. Properties with values for just one material (17, in this case) are not shown.
For each property being compared, the top bar is PBI and the bottom bar is SBR rubber.
Metric UnitsUS Customary Units
Mechanical Properties
| Elongation at Break, % | 3.0 | |
| 530 |
| Tensile Strength: Ultimate (UTS), MPa | 160 | |
| 14 |
Thermal Properties
| Glass Transition Temperature, °C | 410 | |
| -30 |
| Maximum Temperature: Mechanical, °C | 340 | |
| 100 |
| Specific Heat Capacity, J/kg-K | 930 | |
| 1880 |
| Thermal Conductivity, W/m-K | 0.41 | |
| 0.17 |
Otherwise Unclassified Properties
| Density, g/cm3 | 1.3 | |
| 1.1 |
| Limiting Oxygen Index (LOI), % | 58 | |
| 18 |
Common Calculations
| Strength to Weight: Axial, points | 34 | |
| 3.4 |
| Strength to Weight: Bending, points | 50 | |
| 11 |
| Thermal Diffusivity, mm2/s | 0.34 | |
| 0.082 |