PBT vs. UP
PBT belongs to the thermoplastics classification, while UP belongs to the thermoset plastics. There are 11 material properties with values for both materials. Properties with values for just one material (12, in this case) are not shown.
For each property being compared, the top bar is PBT and the bottom bar is UP.
Metric UnitsUS Customary Units
Mechanical Properties
| Elastic (Young's, Tensile) Modulus, GPa | 2.7 to 8.7 | |
| 17 |
| Elongation at Break, % | 2.5 to 43 | |
| 1.0 |
| Tensile Strength: Ultimate (UTS), MPa | 58 to 140 | |
| 30 |
Thermal Properties
| Glass Transition Temperature, °C | 40 | |
| 60 |
| Specific Heat Capacity, J/kg-K | 1040 to 1200 | |
| 1200 |
Otherwise Unclassified Properties
| Density, g/cm3 | 1.3 to 1.5 | |
| 2.0 |
| Limiting Oxygen Index (LOI), % | 20 | |
| 20 |
Common Calculations
| Stiffness to Weight: Axial, points | 1.1 to 3.2 | |
| 4.7 |
| Stiffness to Weight: Bending, points | 35 to 45 | |
| 43 |
| Strength to Weight: Axial, points | 12 to 25 | |
| 4.2 |
| Strength to Weight: Bending, points | 25 to 38 | |
| 11 |