PHB vs. PET
Both PHB and PET are thermoplastics. There are 11 material properties with values for both materials. Properties with values for just one material (13, in this case) are not shown.
For each property being compared, the top bar is PHB and the bottom bar is PET.
Metric UnitsUS Customary Units
Mechanical Properties
| Elastic (Young's, Tensile) Modulus, GPa | 1.3 | |
| 3.5 to 11 |
| Elongation at Break, % | 7.5 | |
| 2.5 to 70 |
| Tensile Strength: Ultimate (UTS), MPa | 30 | |
| 60 to 140 |
Thermal Properties
| Maximum Temperature: Mechanical, °C | 120 | |
| 80 |
| Melting Onset (Solidus), °C | 180 | |
| 260 |
Electrical Properties
| Dielectric Constant (Relative Permittivity) At 1 Hz | 3.0 | |
| 3.7 |
Otherwise Unclassified Properties
| Density, g/cm3 | 1.3 | |
| 1.4 to 1.6 |
Common Calculations
| Stiffness to Weight: Axial, points | 0.58 | |
| 1.2 to 4.4 |
| Stiffness to Weight: Bending, points | 29 | |
| 32 to 54 |
| Strength to Weight: Axial, points | 6.7 | |
| 12 to 27 |
| Strength to Weight: Bending, points | 17 | |
| 25 to 41 |