PP Copolymer vs. PTMT
Both PP copolymer and PTMT are thermoplastics. There are 10 material properties with values for both materials. Properties with values for just one material (7, in this case) are not shown.
For each property being compared, the top bar is PP copolymer and the bottom bar is PTMT.
Metric UnitsUS Customary Units
Material Properties
| Density, g/cm3 | 0.9 | |
| 1.3 |
| Dielectric Constant (Relative Permittivity) At 1 Hz | 2.2 to 2.3 | |
| 3.2 |
| Dielectric Strength (Breakdown Potential), kV/mm | 21 to 22 | |
| 17 |
| Heat Deflection Temperature At 1.82 MPa (264 psi), °C | 50 to 100 | |
| 50 |
| Heat Deflection Temperature At 455 kPa (66 psi), °C | 82 to 98 | |
| 150 |
| Impact Strength: Notched Izod, J/m | 110 to 350 | |
| 53 |
| Maximum Temperature: Mechanical, °C | 80 | |
| 130 |
| Strength to Weight: Axial, points | 7.1 to 10 | |
| 12 |
| Strength to Weight: Bending, points | 20 to 25 | |
| 25 |
| Tensile Strength: Ultimate (UTS), MPa | 23 to 33 | |
| 56 |