MakeItFrom.com
Menu (ESC)

SAE-AISI 1017 Steel vs. 336.0 Aluminum

SAE-AISI 1017 steel belongs to the iron alloys classification, while 336.0 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is SAE-AISI 1017 steel and the bottom bar is 336.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 120 to 130
110 to 130
Elastic (Young's, Tensile) Modulus, GPa 190
75
Elongation at Break, % 20 to 30
0.5
Fatigue Strength, MPa 170 to 270
80 to 93
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 73
28
Shear Strength, MPa 280 to 290
190 to 250
Tensile Strength: Ultimate (UTS), MPa 420 to 460
250 to 320
Tensile Strength: Yield (Proof), MPa 220 to 390
190 to 300

Thermal Properties

Latent Heat of Fusion, J/g 250
570
Maximum Temperature: Mechanical, °C 400
210
Melting Completion (Liquidus), °C 1470
570
Melting Onset (Solidus), °C 1420
540
Specific Heat Capacity, J/kg-K 470
890
Thermal Conductivity, W/m-K 53
120
Thermal Expansion, µm/m-K 12
19

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 6.9
29
Electrical Conductivity: Equal Weight (Specific), % IACS 7.9
95

Otherwise Unclassified Properties

Base Metal Price, % relative 1.8
11
Density, g/cm3 7.9
2.8
Embodied Carbon, kg CO2/kg material 1.4
7.9
Embodied Energy, MJ/kg 18
140
Embodied Water, L/kg 45
1010

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 88 to 110
1.1 to 1.6
Resilience: Unit (Modulus of Resilience), kJ/m3 130 to 400
250 to 580
Stiffness to Weight: Axial, points 13
15
Stiffness to Weight: Bending, points 24
51
Strength to Weight: Axial, points 15 to 16
25 to 32
Strength to Weight: Bending, points 16 to 17
32 to 38
Thermal Diffusivity, mm2/s 14
48
Thermal Shock Resistance, points 13 to 14
12 to 16

Alloy Composition

Aluminum (Al), % 0
79.1 to 85.8
Carbon (C), % 0.15 to 0.2
0
Copper (Cu), % 0
0.5 to 1.5
Iron (Fe), % 99.11 to 99.55
0 to 1.2
Magnesium (Mg), % 0
0.7 to 1.3
Manganese (Mn), % 0.3 to 0.6
0 to 0.35
Nickel (Ni), % 0
2.0 to 3.0
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0
11 to 13
Sulfur (S), % 0 to 0.050
0
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0
0 to 0.35