MakeItFrom.com
Menu (ESC)

SAE-AISI 1140 Steel vs. EN 1.5507 Steel

Both SAE-AISI 1140 steel and EN 1.5507 steel are iron alloys. Their average alloy composition is basically identical. There are 26 material properties with values for both materials. Properties with values for just one material (6, in this case) are not shown.

For each property being compared, the top bar is SAE-AISI 1140 steel and the bottom bar is EN 1.5507 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 170 to 180
140 to 260
Elastic (Young's, Tensile) Modulus, GPa 190
190
Poisson's Ratio 0.29
0.29
Reduction in Area, % 39 to 46
58 to 72
Shear Modulus, GPa 72
73
Tensile Strength: Ultimate (UTS), MPa 600 to 700
450 to 880

Thermal Properties

Latent Heat of Fusion, J/g 250
250
Maximum Temperature: Mechanical, °C 400
410
Melting Completion (Liquidus), °C 1460
1460
Melting Onset (Solidus), °C 1420
1420
Specific Heat Capacity, J/kg-K 470
470
Thermal Conductivity, W/m-K 51
49
Thermal Expansion, µm/m-K 13
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.0
7.1
Electrical Conductivity: Equal Weight (Specific), % IACS 8.1
8.2

Otherwise Unclassified Properties

Base Metal Price, % relative 1.8
2.0
Density, g/cm3 7.8
7.8
Embodied Carbon, kg CO2/kg material 1.4
1.4
Embodied Energy, MJ/kg 18
19
Embodied Water, L/kg 46
49

Common Calculations

Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 24
24
Strength to Weight: Axial, points 21 to 25
16 to 31
Strength to Weight: Bending, points 20 to 22
17 to 26
Thermal Diffusivity, mm2/s 14
13
Thermal Shock Resistance, points 18 to 21
13 to 26

Alloy Composition

Aluminum (Al), % 0
0.020 to 0.080
Boron (B), % 0
0.00080 to 0.0050
Carbon (C), % 0.37 to 0.44
0.21 to 0.25
Chromium (Cr), % 0
0.25 to 0.35
Copper (Cu), % 0
0 to 0.25
Iron (Fe), % 98.4 to 98.9
97.8 to 98.7
Manganese (Mn), % 0.7 to 1.0
0.8 to 1.0
Phosphorus (P), % 0 to 0.040
0 to 0.015
Silicon (Si), % 0
0 to 0.15
Sulfur (S), % 0.080 to 0.13
0 to 0.015
Titanium (Ti), % 0
0 to 0.060