MakeItFrom.com
Menu (ESC)

SAE-AISI 50B60 Steel vs. EN 1.1244 Steel

Both SAE-AISI 50B60 steel and EN 1.1244 steel are iron alloys. Their average alloy composition is basically identical. There are 25 material properties with values for both materials. Properties with values for just one material (6, in this case) are not shown.

For each property being compared, the top bar is SAE-AISI 50B60 steel and the bottom bar is EN 1.1244 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 180 to 190
210 to 220
Elastic (Young's, Tensile) Modulus, GPa 190
190
Poisson's Ratio 0.29
0.29
Shear Modulus, GPa 72
72
Tensile Strength: Ultimate (UTS), MPa 610 to 630
730 to 770

Thermal Properties

Latent Heat of Fusion, J/g 250
250
Maximum Temperature: Mechanical, °C 410
400
Melting Completion (Liquidus), °C 1450
1450
Melting Onset (Solidus), °C 1410
1410
Specific Heat Capacity, J/kg-K 470
470
Thermal Conductivity, W/m-K 45
51
Thermal Expansion, µm/m-K 12
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.2
7.1
Electrical Conductivity: Equal Weight (Specific), % IACS 8.3
8.2

Otherwise Unclassified Properties

Base Metal Price, % relative 2.0
1.9
Density, g/cm3 7.8
7.8
Embodied Carbon, kg CO2/kg material 1.4
1.4
Embodied Energy, MJ/kg 19
19
Embodied Water, L/kg 48
47

Common Calculations

Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 24
24
Strength to Weight: Axial, points 22 to 23
26 to 28
Strength to Weight: Bending, points 20 to 21
23 to 24
Thermal Diffusivity, mm2/s 12
14
Thermal Shock Resistance, points 20
23 to 25

Alloy Composition

Aluminum (Al), % 0
0 to 0.050
Boron (B), % 0.00050 to 0.0030
0
Carbon (C), % 0.56 to 0.64
0.65 to 0.75
Chromium (Cr), % 0.4 to 0.6
0
Copper (Cu), % 0
0 to 0.3
Iron (Fe), % 97.3 to 98.1
98.1 to 99.2
Manganese (Mn), % 0.75 to 1.0
0.8 to 1.1
Oxygen (O), % 0
0 to 0.0020
Phosphorus (P), % 0 to 0.035
0 to 0.025
Silicon (Si), % 0.15 to 0.35
0 to 0.4
Sulfur (S), % 0 to 0.040
0 to 0.030

Comparable Variants