MakeItFrom.com
Menu (ESC)

SAE-AISI F1 Steel vs. EN 2.4964 Cobalt

SAE-AISI F1 steel belongs to the iron alloys classification, while EN 2.4964 cobalt belongs to the cobalt alloys. There are 22 material properties with values for both materials. Properties with values for just one material (7, in this case) are not shown.

For each property being compared, the top bar is SAE-AISI F1 steel and the bottom bar is EN 2.4964 cobalt.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 190
220
Poisson's Ratio 0.29
0.29
Shear Modulus, GPa 72
86
Tensile Strength: Ultimate (UTS), MPa 620 to 2320
960

Thermal Properties

Latent Heat of Fusion, J/g 250
290
Melting Completion (Liquidus), °C 1480
1630
Melting Onset (Solidus), °C 1430
1550
Specific Heat Capacity, J/kg-K 470
400
Thermal Conductivity, W/m-K 45
15
Thermal Expansion, µm/m-K 13
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.3
1.9
Electrical Conductivity: Equal Weight (Specific), % IACS 8.3
1.8

Otherwise Unclassified Properties

Density, g/cm3 7.9
9.6
Embodied Carbon, kg CO2/kg material 1.7
9.8
Embodied Energy, MJ/kg 24
140
Embodied Water, L/kg 46
450

Common Calculations

Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 24
21
Strength to Weight: Axial, points 22 to 82
28
Strength to Weight: Bending, points 20 to 49
23
Thermal Diffusivity, mm2/s 12
3.9
Thermal Shock Resistance, points 19 to 70
25

Alloy Composition

Carbon (C), % 1.0 to 1.3
0.050 to 0.15
Chromium (Cr), % 0
19 to 21
Cobalt (Co), % 0
46.4 to 58
Iron (Fe), % 95.9 to 98
0 to 3.0
Manganese (Mn), % 0 to 0.5
0 to 2.0
Nickel (Ni), % 0
9.0 to 11
Phosphorus (P), % 0 to 0.030
0 to 0.020
Silicon (Si), % 0.1 to 0.5
0 to 0.4
Sulfur (S), % 0 to 0.030
0 to 0.015
Tungsten (W), % 1.0 to 1.8
14 to 16