MakeItFrom.com
Menu (ESC)

SAE-AISI T1 Steel vs. EN 1.5024 Steel

Both SAE-AISI T1 steel and EN 1.5024 steel are iron alloys. They have 76% of their average alloy composition in common. There are 21 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown.

For each property being compared, the top bar is SAE-AISI T1 steel and the bottom bar is EN 1.5024 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
190
Poisson's Ratio 0.29
0.29
Shear Modulus, GPa 80
72
Tensile Strength: Ultimate (UTS), MPa 770 to 2130
670 to 1930

Thermal Properties

Latent Heat of Fusion, J/g 240
270
Melting Completion (Liquidus), °C 1810
1440
Melting Onset (Solidus), °C 1750
1400
Specific Heat Capacity, J/kg-K 410
480
Thermal Conductivity, W/m-K 20
50
Thermal Expansion, µm/m-K 12
13

Otherwise Unclassified Properties

Base Metal Price, % relative 45
1.9
Density, g/cm3 9.3
7.7
Embodied Carbon, kg CO2/kg material 8.2
1.4
Embodied Energy, MJ/kg 130
19
Embodied Water, L/kg 90
45

Common Calculations

Stiffness to Weight: Axial, points 12
13
Stiffness to Weight: Bending, points 21
25
Strength to Weight: Axial, points 23 to 64
24 to 69
Strength to Weight: Bending, points 20 to 40
22 to 45
Thermal Diffusivity, mm2/s 5.2
14
Thermal Shock Resistance, points 23 to 64
20 to 58

Alloy Composition

Carbon (C), % 0.65 to 0.8
0.42 to 0.5
Chromium (Cr), % 3.8 to 4.5
0
Copper (Cu), % 0 to 0.25
0
Iron (Fe), % 73.2 to 77.2
96.7 to 97.6
Manganese (Mn), % 0.1 to 0.4
0.5 to 0.8
Nickel (Ni), % 0 to 0.3
0
Phosphorus (P), % 0 to 0.030
0 to 0.025
Silicon (Si), % 0.2 to 0.4
1.5 to 2.0
Sulfur (S), % 0 to 0.030
0 to 0.025
Tungsten (W), % 17.3 to 18.8
0
Vanadium (V), % 0.9 to 1.3
0

Comparable Variants