MakeItFrom.com
Menu (ESC)

SAE-AISI T1 Steel vs. R31537 Cobalt

SAE-AISI T1 steel belongs to the iron alloys classification, while R31537 cobalt belongs to the cobalt alloys. There are 20 material properties with values for both materials. Properties with values for just one material (11, in this case) are not shown.

For each property being compared, the top bar is SAE-AISI T1 steel and the bottom bar is R31537 cobalt.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
220
Poisson's Ratio 0.29
0.29
Shear Modulus, GPa 80
87
Tensile Strength: Ultimate (UTS), MPa 770 to 2130
1000 to 1340

Thermal Properties

Latent Heat of Fusion, J/g 240
320
Melting Completion (Liquidus), °C 1810
1360
Melting Onset (Solidus), °C 1750
1290
Specific Heat Capacity, J/kg-K 410
450
Thermal Conductivity, W/m-K 20
13
Thermal Expansion, µm/m-K 12
13

Otherwise Unclassified Properties

Density, g/cm3 9.3
8.4
Embodied Carbon, kg CO2/kg material 8.2
8.1
Embodied Energy, MJ/kg 130
110
Embodied Water, L/kg 90
530

Common Calculations

Stiffness to Weight: Axial, points 12
15
Stiffness to Weight: Bending, points 21
24
Strength to Weight: Axial, points 23 to 64
33 to 44
Strength to Weight: Bending, points 20 to 40
26 to 32
Thermal Diffusivity, mm2/s 5.2
3.4
Thermal Shock Resistance, points 23 to 64
24 to 32

Alloy Composition

Carbon (C), % 0.65 to 0.8
0 to 0.14
Chromium (Cr), % 3.8 to 4.5
26 to 30
Cobalt (Co), % 0
58.9 to 69
Copper (Cu), % 0 to 0.25
0
Iron (Fe), % 73.2 to 77.2
0 to 0.75
Manganese (Mn), % 0.1 to 0.4
0 to 1.0
Molybdenum (Mo), % 0
5.0 to 7.0
Nickel (Ni), % 0 to 0.3
0 to 1.0
Nitrogen (N), % 0
0 to 0.25
Phosphorus (P), % 0 to 0.030
0
Silicon (Si), % 0.2 to 0.4
0 to 1.0
Sulfur (S), % 0 to 0.030
0
Tungsten (W), % 17.3 to 18.8
0
Vanadium (V), % 0.9 to 1.3
0

Comparable Variants