Thermoset PI vs. Ionomer
Thermoset PI belongs to the thermoset plastics classification, while ionomer belongs to the thermoplastics. There are 7 material properties with values for both materials. Properties with values for just one material (23, in this case) are not shown.
For each property being compared, the top bar is thermoset PI and the bottom bar is ionomer.
Metric UnitsUS Customary Units
Material Properties
| Density, g/cm3 | 1.4 to 1.6 | |
| 0.94 |
| Dielectric Strength (Breakdown Potential), kV/mm | 20 | |
| 39 |
| Elongation at Break, % | 2.0 to 5.9 | |
| 350 |
| Maximum Temperature: Mechanical, °C | 260 | |
| 75 |
| Strength to Weight: Axial, points | 6.5 to 16 | |
| 11 |
| Strength to Weight: Bending, points | 16 to 30 | |
| 26 |
| Tensile Strength: Ultimate (UTS), MPa | 37 to 81 | |
| 37 |