Thermoset PI vs. PMP
Thermoset PI belongs to the thermoset plastics classification, while PMP belongs to the thermoplastics. There are 14 material properties with values for both materials. Properties with values for just one material (17, in this case) are not shown.
For each property being compared, the top bar is thermoset PI and the bottom bar is PMP.
Metric UnitsUS Customary Units
Mechanical Properties
| Elongation at Break, % | 2.0 to 5.9 | |
| 30 |
| Impact Strength: Notched Izod, J/m | 21 to 43 | |
| 130 |
| Tensile Strength: Ultimate (UTS), MPa | 37 to 81 | |
| 24 |
Thermal Properties
| Glass Transition Temperature, °C | 360 | |
| 30 |
| Maximum Temperature: Mechanical, °C | 260 | |
| 140 |
| Specific Heat Capacity, J/kg-K | 1130 | |
| 1750 |
| Thermal Conductivity, W/m-K | 0.29 to 1.7 | |
| 0.17 |
| Thermal Expansion, µm/m-K | 38 to 54 | |
| 120 |
Electrical Properties
| Dielectric Strength (Breakdown Potential), kV/mm | 20 | |
| 28 |
| Electrical Resistivity Order of Magnitude, 10x Ω-m | 15 | |
| 14 |
Otherwise Unclassified Properties
| Density, g/cm3 | 1.4 to 1.6 | |
| 0.83 |
Common Calculations
| Strength to Weight: Axial, points | 6.5 to 16 | |
| 8.0 |
| Strength to Weight: Bending, points | 16 to 30 | |
| 22 |
| Thermal Diffusivity, mm2/s | 0.18 to 0.95 | |
| 0.12 |