MakeItFrom.com
Menu (ESC)

C10200 Copper vs. 514.0 Aluminum

C10200 copper belongs to the copper alloys classification, while 514.0 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is C10200 copper and the bottom bar is 514.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 120
68
Elongation at Break, % 2.6 to 50
7.3
Poisson's Ratio 0.34
0.33
Shear Modulus, GPa 43
25
Shear Strength, MPa 160 to 240
140
Tensile Strength: Ultimate (UTS), MPa 230 to 410
180
Tensile Strength: Yield (Proof), MPa 77 to 400
74

Thermal Properties

Latent Heat of Fusion, J/g 210
400
Maximum Temperature: Mechanical, °C 200
170
Melting Completion (Liquidus), °C 1080
640
Melting Onset (Solidus), °C 1080
610
Specific Heat Capacity, J/kg-K 390
900
Thermal Conductivity, W/m-K 390
140
Thermal Expansion, µm/m-K 17
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 100
35
Electrical Conductivity: Equal Weight (Specific), % IACS 100
120

Otherwise Unclassified Properties

Base Metal Price, % relative 31
9.5
Density, g/cm3 9.0
2.7
Embodied Carbon, kg CO2/kg material 2.6
8.9
Embodied Energy, MJ/kg 41
150
Embodied Water, L/kg 310
1180

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 9.4 to 91
11
Resilience: Unit (Modulus of Resilience), kJ/m3 25 to 690
41
Stiffness to Weight: Axial, points 7.2
14
Stiffness to Weight: Bending, points 18
51
Strength to Weight: Axial, points 7.2 to 13
19
Strength to Weight: Bending, points 9.4 to 14
26
Thermal Diffusivity, mm2/s 110
57
Thermal Shock Resistance, points 8.2 to 15
7.9

Alloy Composition

Aluminum (Al), % 0
93.6 to 96.5
Copper (Cu), % 99.95 to 100
0 to 0.15
Iron (Fe), % 0
0 to 0.5
Magnesium (Mg), % 0
3.5 to 4.5
Manganese (Mn), % 0
0 to 0.35
Oxygen (O), % 0 to 0.0010
0
Silicon (Si), % 0
0 to 0.35
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0
0 to 0.15
Residuals, % 0
0 to 0.15