MakeItFrom.com
Menu (ESC)

C23000 Brass vs. 240.0 Aluminum

C23000 brass belongs to the copper alloys classification, while 240.0 aluminum belongs to the aluminum alloys. There are 28 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is C23000 brass and the bottom bar is 240.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 110
72
Elongation at Break, % 2.9 to 47
1.0
Poisson's Ratio 0.33
0.33
Shear Modulus, GPa 42
27
Tensile Strength: Ultimate (UTS), MPa 280 to 590
240
Tensile Strength: Yield (Proof), MPa 83 to 480
200

Thermal Properties

Latent Heat of Fusion, J/g 190
380
Maximum Temperature: Mechanical, °C 170
180
Melting Completion (Liquidus), °C 1030
600
Melting Onset (Solidus), °C 990
520
Specific Heat Capacity, J/kg-K 390
860
Thermal Conductivity, W/m-K 160
96
Thermal Expansion, µm/m-K 19
22

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 37
23
Electrical Conductivity: Equal Weight (Specific), % IACS 39
65

Otherwise Unclassified Properties

Base Metal Price, % relative 28
12
Density, g/cm3 8.6
3.2
Embodied Carbon, kg CO2/kg material 2.6
8.7
Embodied Energy, MJ/kg 43
150
Embodied Water, L/kg 310
1100

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 6.2 to 260
2.2
Resilience: Unit (Modulus of Resilience), kJ/m3 31 to 1040
280
Stiffness to Weight: Axial, points 7.2
12
Stiffness to Weight: Bending, points 19
43
Strength to Weight: Axial, points 8.9 to 19
20
Strength to Weight: Bending, points 11 to 18
26
Thermal Diffusivity, mm2/s 48
35
Thermal Shock Resistance, points 9.4 to 20
11

Alloy Composition

Aluminum (Al), % 0
81.7 to 86.9
Copper (Cu), % 84 to 86
7.0 to 9.0
Iron (Fe), % 0 to 0.050
0 to 0.5
Lead (Pb), % 0 to 0.050
0
Magnesium (Mg), % 0
5.5 to 6.5
Manganese (Mn), % 0
0.3 to 0.7
Nickel (Ni), % 0
0.3 to 0.7
Silicon (Si), % 0
0 to 0.5
Titanium (Ti), % 0
0 to 0.2
Zinc (Zn), % 13.7 to 16
0 to 0.1
Residuals, % 0
0 to 0.15