MakeItFrom.com
Menu (ESC)

C26200 Brass vs. 5456 Aluminum

C26200 brass belongs to the copper alloys classification, while 5456 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is C26200 brass and the bottom bar is 5456 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 110
68
Elongation at Break, % 3.0 to 180
11 to 18
Poisson's Ratio 0.31
0.33
Shear Modulus, GPa 41
26
Shear Strength, MPa 230 to 390
190 to 210
Tensile Strength: Ultimate (UTS), MPa 330 to 770
320 to 340
Tensile Strength: Yield (Proof), MPa 110 to 490
150 to 250

Thermal Properties

Latent Heat of Fusion, J/g 180
390
Maximum Temperature: Mechanical, °C 140
190
Melting Completion (Liquidus), °C 950
640
Melting Onset (Solidus), °C 920
570
Specific Heat Capacity, J/kg-K 390
900
Thermal Conductivity, W/m-K 120
120
Thermal Expansion, µm/m-K 20
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 28
29
Electrical Conductivity: Equal Weight (Specific), % IACS 31
97

Otherwise Unclassified Properties

Base Metal Price, % relative 25
9.5
Density, g/cm3 8.2
2.7
Embodied Carbon, kg CO2/kg material 2.7
9.0
Embodied Energy, MJ/kg 45
150
Embodied Water, L/kg 320
1170

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 19 to 160
33 to 46
Resilience: Unit (Modulus of Resilience), kJ/m3 62 to 1110
170 to 470
Stiffness to Weight: Axial, points 7.2
14
Stiffness to Weight: Bending, points 19
50
Strength to Weight: Axial, points 11 to 26
33 to 35
Strength to Weight: Bending, points 13 to 23
38 to 40
Thermal Diffusivity, mm2/s 38
48
Thermal Shock Resistance, points 11 to 26
14 to 15

Alloy Composition

Aluminum (Al), % 0
92 to 94.8
Chromium (Cr), % 0
0.050 to 0.2
Copper (Cu), % 67 to 70
0 to 0.1
Iron (Fe), % 0 to 0.050
0 to 0.4
Lead (Pb), % 0 to 0.070
0
Magnesium (Mg), % 0
4.7 to 5.5
Manganese (Mn), % 0
0.5 to 1.0
Silicon (Si), % 0
0 to 0.25
Titanium (Ti), % 0
0 to 0.2
Zinc (Zn), % 29.6 to 33
0 to 0.25
Residuals, % 0
0 to 0.15