MakeItFrom.com
Menu (ESC)

C34000 Brass vs. EN AC-51200 Aluminum

C34000 brass belongs to the copper alloys classification, while EN AC-51200 aluminum belongs to the aluminum alloys. There are 24 material properties with values for both materials. Properties with values for just one material (8, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is C34000 brass and the bottom bar is EN AC-51200 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 100
67
Poisson's Ratio 0.31
0.33
Shear Modulus, GPa 40
25
Tensile Strength: Ultimate (UTS), MPa 340 to 650
220

Thermal Properties

Latent Heat of Fusion, J/g 170
410
Maximum Temperature: Mechanical, °C 120
170
Melting Completion (Liquidus), °C 930
640
Melting Onset (Solidus), °C 890
570
Specific Heat Capacity, J/kg-K 380
910
Thermal Conductivity, W/m-K 120
92
Thermal Expansion, µm/m-K 21
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 26
22
Electrical Conductivity: Equal Weight (Specific), % IACS 29
74

Otherwise Unclassified Properties

Base Metal Price, % relative 24
9.5
Density, g/cm3 8.1
2.6
Embodied Carbon, kg CO2/kg material 2.6
9.6
Embodied Energy, MJ/kg 45
150
Embodied Water, L/kg 320
1150

Common Calculations

Stiffness to Weight: Axial, points 7.1
14
Stiffness to Weight: Bending, points 19
51
Strength to Weight: Axial, points 11 to 22
24
Strength to Weight: Bending, points 13 to 21
31
Thermal Diffusivity, mm2/s 37
39
Thermal Shock Resistance, points 11 to 22
10

Alloy Composition

Aluminum (Al), % 0
84.5 to 92
Copper (Cu), % 62 to 65
0 to 0.1
Iron (Fe), % 0 to 0.1
0 to 1.0
Lead (Pb), % 0.8 to 1.5
0 to 0.1
Magnesium (Mg), % 0
8.0 to 10.5
Manganese (Mn), % 0
0 to 0.55
Nickel (Ni), % 0
0 to 0.1
Silicon (Si), % 0
0 to 2.5
Tin (Sn), % 0
0 to 0.1
Titanium (Ti), % 0
0 to 0.2
Zinc (Zn), % 33 to 37.2
0 to 0.25
Residuals, % 0
0 to 0.15