MakeItFrom.com
Menu (ESC)

C61500 Bronze vs. 1100 Aluminum

C61500 bronze belongs to the copper alloys classification, while 1100 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is C61500 bronze and the bottom bar is 1100 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 110
69
Elongation at Break, % 3.0 to 55
1.1 to 32
Poisson's Ratio 0.34
0.33
Shear Modulus, GPa 42
26
Shear Strength, MPa 350 to 550
54 to 95
Tensile Strength: Ultimate (UTS), MPa 480 to 970
86 to 170
Tensile Strength: Yield (Proof), MPa 150 to 720
28 to 150

Thermal Properties

Latent Heat of Fusion, J/g 220
400
Maximum Temperature: Mechanical, °C 220
180
Melting Completion (Liquidus), °C 1040
660
Melting Onset (Solidus), °C 1030
640
Specific Heat Capacity, J/kg-K 430
900
Thermal Conductivity, W/m-K 58
220
Thermal Expansion, µm/m-K 18
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 13
59
Electrical Conductivity: Equal Weight (Specific), % IACS 13
190

Otherwise Unclassified Properties

Base Metal Price, % relative 29
9.0
Density, g/cm3 8.4
2.7
Embodied Carbon, kg CO2/kg material 3.2
8.2
Embodied Energy, MJ/kg 52
150
Embodied Water, L/kg 380
1190

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 27 to 200
0.76 to 52
Resilience: Unit (Modulus of Resilience), kJ/m3 100 to 2310
5.7 to 170
Stiffness to Weight: Axial, points 7.5
14
Stiffness to Weight: Bending, points 19
50
Strength to Weight: Axial, points 16 to 32
8.7 to 17
Strength to Weight: Bending, points 16 to 26
16 to 25
Thermal Diffusivity, mm2/s 16
90
Thermal Shock Resistance, points 17 to 34
3.7 to 7.4

Alloy Composition

Aluminum (Al), % 7.7 to 8.3
99 to 99.95
Copper (Cu), % 89 to 90.5
0.050 to 0.2
Iron (Fe), % 0
0 to 1.0
Lead (Pb), % 0 to 0.015
0
Manganese (Mn), % 0
0 to 0.050
Nickel (Ni), % 1.8 to 2.2
0
Silicon (Si), % 0
0 to 1.0
Zinc (Zn), % 0
0 to 0.1
Residuals, % 0
0 to 0.15