MakeItFrom.com
Menu (ESC)

C75700 Nickel Silver vs. 3003 Aluminum

C75700 nickel silver belongs to the copper alloys classification, while 3003 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is C75700 nickel silver and the bottom bar is 3003 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 120
70
Elongation at Break, % 3.2 to 22
1.1 to 28
Poisson's Ratio 0.32
0.33
Shear Modulus, GPa 45
26
Shear Strength, MPa 350 to 370
68 to 130
Tensile Strength: Ultimate (UTS), MPa 590 to 610
110 to 240
Tensile Strength: Yield (Proof), MPa 470 to 580
40 to 210

Thermal Properties

Latent Heat of Fusion, J/g 200
400
Maximum Temperature: Mechanical, °C 180
180
Melting Completion (Liquidus), °C 1040
650
Melting Onset (Solidus), °C 990
640
Specific Heat Capacity, J/kg-K 390
900
Thermal Conductivity, W/m-K 40
180
Thermal Expansion, µm/m-K 16
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 8.0
44
Electrical Conductivity: Equal Weight (Specific), % IACS 8.6
140

Otherwise Unclassified Properties

Base Metal Price, % relative 30
9.5
Density, g/cm3 8.4
2.8
Embodied Carbon, kg CO2/kg material 3.6
8.1
Embodied Energy, MJ/kg 56
150
Embodied Water, L/kg 310
1180

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 19 to 120
0.95 to 63
Resilience: Unit (Modulus of Resilience), kJ/m3 930 to 1410
11 to 300
Stiffness to Weight: Axial, points 7.8
14
Stiffness to Weight: Bending, points 19
50
Strength to Weight: Axial, points 19 to 20
11 to 24
Strength to Weight: Bending, points 19
18 to 30
Thermal Diffusivity, mm2/s 12
71
Thermal Shock Resistance, points 22 to 23
4.7 to 10

Alloy Composition

Aluminum (Al), % 0
96.8 to 99
Copper (Cu), % 63.5 to 66.5
0.050 to 0.2
Iron (Fe), % 0 to 0.25
0 to 0.7
Lead (Pb), % 0 to 0.050
0
Manganese (Mn), % 0 to 0.5
1.0 to 1.5
Nickel (Ni), % 11 to 13
0
Silicon (Si), % 0
0 to 0.6
Zinc (Zn), % 19.2 to 25.5
0 to 0.1
Residuals, % 0 to 0.5
0 to 0.15