MakeItFrom.com
Menu (ESC)

C79600 Nickel Silver vs. 4007 Aluminum

C79600 nickel silver belongs to the copper alloys classification, while 4007 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is C79600 nickel silver and the bottom bar is 4007 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 110
71
Elongation at Break, % 15
5.1 to 23
Poisson's Ratio 0.3
0.33
Shear Modulus, GPa 43
27
Shear Strength, MPa 290
80 to 90
Tensile Strength: Ultimate (UTS), MPa 480
130 to 160
Tensile Strength: Yield (Proof), MPa 300
50 to 120

Thermal Properties

Latent Heat of Fusion, J/g 180
410
Maximum Temperature: Mechanical, °C 130
170
Melting Completion (Liquidus), °C 930
650
Melting Onset (Solidus), °C 880
590
Specific Heat Capacity, J/kg-K 390
890
Thermal Conductivity, W/m-K 36
170
Thermal Expansion, µm/m-K 21
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.0
42
Electrical Conductivity: Equal Weight (Specific), % IACS 8.0
140

Otherwise Unclassified Properties

Base Metal Price, % relative 25
9.5
Density, g/cm3 7.9
2.8
Embodied Carbon, kg CO2/kg material 3.5
8.1
Embodied Energy, MJ/kg 57
150
Embodied Water, L/kg 310
1160

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 63
7.4 to 23
Resilience: Unit (Modulus of Resilience), kJ/m3 400
18 to 110
Stiffness to Weight: Axial, points 7.8
14
Stiffness to Weight: Bending, points 20
49
Strength to Weight: Axial, points 17
12 to 15
Strength to Weight: Bending, points 17
20 to 23
Thermal Diffusivity, mm2/s 12
67
Thermal Shock Resistance, points 15
5.5 to 6.7

Alloy Composition

Aluminum (Al), % 0
94.1 to 97.6
Chromium (Cr), % 0
0.050 to 0.25
Cobalt (Co), % 0
0 to 0.050
Copper (Cu), % 43.5 to 46.5
0 to 0.2
Iron (Fe), % 0
0.4 to 1.0
Lead (Pb), % 0.8 to 1.2
0
Magnesium (Mg), % 0
0 to 0.2
Manganese (Mn), % 1.5 to 2.5
0.8 to 1.5
Nickel (Ni), % 9.0 to 11
0.15 to 0.7
Silicon (Si), % 0
1.0 to 1.7
Titanium (Ti), % 0
0 to 0.1
Zinc (Zn), % 38.3 to 45.2
0 to 0.1
Residuals, % 0 to 0.5
0 to 0.15