MakeItFrom.com
Menu (ESC)

S32550 Stainless Steel vs. 512.0 Aluminum

S32550 stainless steel belongs to the iron alloys classification, while 512.0 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is S32550 stainless steel and the bottom bar is 512.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 260
50
Elastic (Young's, Tensile) Modulus, GPa 200
69
Elongation at Break, % 21
2.0
Fatigue Strength, MPa 400
58
Poisson's Ratio 0.27
0.33
Shear Modulus, GPa 80
26
Tensile Strength: Ultimate (UTS), MPa 860
130
Tensile Strength: Yield (Proof), MPa 620
83

Thermal Properties

Latent Heat of Fusion, J/g 300
420
Maximum Temperature: Mechanical, °C 1100
180
Melting Completion (Liquidus), °C 1440
630
Melting Onset (Solidus), °C 1390
590
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 16
150
Thermal Expansion, µm/m-K 13
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.2
38
Electrical Conductivity: Equal Weight (Specific), % IACS 2.5
130

Otherwise Unclassified Properties

Base Metal Price, % relative 20
9.5
Density, g/cm3 7.8
2.7
Embodied Carbon, kg CO2/kg material 3.8
8.8
Embodied Energy, MJ/kg 53
150
Embodied Water, L/kg 180
1160

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 160
2.3
Resilience: Unit (Modulus of Resilience), kJ/m3 940
50
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
51
Strength to Weight: Axial, points 31
14
Strength to Weight: Bending, points 26
22
Thermal Diffusivity, mm2/s 4.4
60
Thermal Shock Resistance, points 23
6.1

Alloy Composition

Aluminum (Al), % 0
90.6 to 95.1
Carbon (C), % 0 to 0.040
0
Chromium (Cr), % 24 to 27
0 to 0.25
Copper (Cu), % 1.5 to 2.5
0 to 0.35
Iron (Fe), % 57.2 to 67
0 to 0.6
Magnesium (Mg), % 0
3.5 to 4.5
Manganese (Mn), % 0 to 1.5
0 to 0.8
Molybdenum (Mo), % 2.9 to 3.9
0
Nickel (Ni), % 4.5 to 6.5
0
Nitrogen (N), % 0.1 to 0.25
0
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 0 to 1.0
1.4 to 2.2
Sulfur (S), % 0 to 0.030
0
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0
0 to 0.35
Residuals, % 0
0 to 0.15