MakeItFrom.com
Menu (ESC)

S39274 Stainless Steel vs. 7020 Aluminum

S39274 stainless steel belongs to the iron alloys classification, while 7020 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is S39274 stainless steel and the bottom bar is 7020 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 270
45 to 100
Elastic (Young's, Tensile) Modulus, GPa 210
70
Elongation at Break, % 17
8.4 to 14
Fatigue Strength, MPa 380
110 to 130
Poisson's Ratio 0.27
0.33
Shear Modulus, GPa 81
26
Shear Strength, MPa 560
110 to 230
Tensile Strength: Ultimate (UTS), MPa 900
190 to 390
Tensile Strength: Yield (Proof), MPa 620
120 to 310

Thermal Properties

Latent Heat of Fusion, J/g 300
380
Maximum Temperature: Mechanical, °C 1100
210
Melting Completion (Liquidus), °C 1480
650
Melting Onset (Solidus), °C 1430
610
Specific Heat Capacity, J/kg-K 470
880
Thermal Conductivity, W/m-K 16
150
Thermal Expansion, µm/m-K 13
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.2
39
Electrical Conductivity: Equal Weight (Specific), % IACS 2.4
120

Otherwise Unclassified Properties

Base Metal Price, % relative 24
9.5
Density, g/cm3 8.0
2.9
Embodied Carbon, kg CO2/kg material 4.3
8.3
Embodied Energy, MJ/kg 60
150
Embodied Water, L/kg 180
1150

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 140
23 to 46
Resilience: Unit (Modulus of Resilience), kJ/m3 940
110 to 690
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 25
47
Strength to Weight: Axial, points 32
18 to 37
Strength to Weight: Bending, points 26
25 to 41
Thermal Diffusivity, mm2/s 4.2
59
Thermal Shock Resistance, points 25
8.3 to 17

Alloy Composition

Aluminum (Al), % 0
91.2 to 94.8
Carbon (C), % 0 to 0.030
0
Chromium (Cr), % 24 to 26
0.1 to 0.35
Copper (Cu), % 0.2 to 0.8
0 to 0.2
Iron (Fe), % 57 to 65.6
0 to 0.4
Magnesium (Mg), % 0
1.0 to 1.4
Manganese (Mn), % 0 to 1.0
0.050 to 0.5
Molybdenum (Mo), % 2.5 to 3.5
0
Nickel (Ni), % 6.0 to 8.0
0
Nitrogen (N), % 0.24 to 0.32
0
Phosphorus (P), % 0 to 0.030
0
Silicon (Si), % 0 to 0.8
0 to 0.35
Sulfur (S), % 0 to 0.020
0
Titanium (Ti), % 0
0 to 0.25
Tungsten (W), % 1.5 to 2.5
0
Zinc (Zn), % 0
4.0 to 5.0
Zirconium (Zr), % 0
0.080 to 0.25
Residuals, % 0
0 to 0.15