MakeItFrom.com
Menu (ESC)

S39274 Stainless Steel vs. 7076 Aluminum

S39274 stainless steel belongs to the iron alloys classification, while 7076 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is S39274 stainless steel and the bottom bar is 7076 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 270
160
Elastic (Young's, Tensile) Modulus, GPa 210
70
Elongation at Break, % 17
6.2
Fatigue Strength, MPa 380
170
Poisson's Ratio 0.27
0.32
Shear Modulus, GPa 81
27
Shear Strength, MPa 560
310
Tensile Strength: Ultimate (UTS), MPa 900
530
Tensile Strength: Yield (Proof), MPa 620
460

Thermal Properties

Latent Heat of Fusion, J/g 300
380
Maximum Temperature: Mechanical, °C 1100
170
Melting Completion (Liquidus), °C 1480
630
Melting Onset (Solidus), °C 1430
460
Specific Heat Capacity, J/kg-K 470
860
Thermal Conductivity, W/m-K 16
140
Thermal Expansion, µm/m-K 13
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.2
35
Electrical Conductivity: Equal Weight (Specific), % IACS 2.4
100

Otherwise Unclassified Properties

Base Metal Price, % relative 24
9.5
Density, g/cm3 8.0
3.0
Embodied Carbon, kg CO2/kg material 4.3
8.0
Embodied Energy, MJ/kg 60
150
Embodied Water, L/kg 180
1110

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 140
31
Resilience: Unit (Modulus of Resilience), kJ/m3 940
1510
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 25
45
Strength to Weight: Axial, points 32
49
Strength to Weight: Bending, points 26
48
Thermal Diffusivity, mm2/s 4.2
54
Thermal Shock Resistance, points 25
23

Alloy Composition

Aluminum (Al), % 0
86.9 to 91.2
Carbon (C), % 0 to 0.030
0
Chromium (Cr), % 24 to 26
0
Copper (Cu), % 0.2 to 0.8
0.3 to 1.0
Iron (Fe), % 57 to 65.6
0 to 0.6
Magnesium (Mg), % 0
1.2 to 2.0
Manganese (Mn), % 0 to 1.0
0.3 to 0.8
Molybdenum (Mo), % 2.5 to 3.5
0
Nickel (Ni), % 6.0 to 8.0
0
Nitrogen (N), % 0.24 to 0.32
0
Phosphorus (P), % 0 to 0.030
0
Silicon (Si), % 0 to 0.8
0 to 0.4
Sulfur (S), % 0 to 0.020
0
Titanium (Ti), % 0
0 to 0.2
Tungsten (W), % 1.5 to 2.5
0
Zinc (Zn), % 0
7.0 to 8.0
Residuals, % 0
0 to 0.15