UHMW-PE vs. LDPE
Both UHMW-PE and LDPE are thermoplastics. There are 15 material properties with values for both materials. Properties with values for just one material (7, in this case) are not shown.
For each property being compared, the top bar is UHMW-PE and the bottom bar is LDPE.
Metric UnitsUS Customary Units
Mechanical Properties
| Elastic (Young's, Tensile) Modulus, GPa | 0.8 | |
| 0.3 |
| Tensile Strength: Ultimate (UTS), MPa | 49 | |
| 7.0 |
Thermal Properties
| Melting Onset (Solidus), °C | 130 | |
| 110 |
| Specific Heat Capacity, J/kg-K | 1750 | |
| 2300 |
| Thermal Conductivity, W/m-K | 0.41 | |
| 0.36 |
| Thermal Expansion, µm/m-K | 180 | |
| 220 |
| Vicat Softening Temperature, °C | 75 | |
| 50 |
Electrical Properties
| Dielectric Constant (Relative Permittivity) At 1 Hz | 2.2 | |
| 2.3 |
Otherwise Unclassified Properties
| Density, g/cm3 | 0.94 | |
| 0.92 |
Common Calculations
| Stiffness to Weight: Axial, points | 0.47 | |
| 0.18 |
| Stiffness to Weight: Bending, points | 33 | |
| 24 |
| Strength to Weight: Axial, points | 14 | |
| 2.1 |
| Strength to Weight: Bending, points | 32 | |
| 8.8 |
| Thermal Diffusivity, mm2/s | 0.25 | |
| 0.17 |
| Thermal Shock Resistance, points | 25 | |
| 7.6 |