MakeItFrom.com
Menu (ESC)

UF vs. Bamboo Plywood

UF belongs to the thermoset plastics classification, while bamboo plywood belongs to the wood-based materials. There are 14 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is UF and the bottom bar is bamboo plywood.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 9.0
18
Elongation at Break, % 1.0
3.0
Tensile Strength: Ultimate (UTS), MPa 30
40

Thermal Properties

Specific Heat Capacity, J/kg-K 1200
1680
Thermal Conductivity, W/m-K 0.4
0.17
Thermal Expansion, µm/m-K 55
4.0

Electrical Properties

Dielectric Strength (Breakdown Potential), kV/mm 35
0.5

Otherwise Unclassified Properties

Density, g/cm3 1.5
0.7

Common Calculations

Stiffness to Weight: Axial, points 3.3
14
Stiffness to Weight: Bending, points 46
120
Strength to Weight: Axial, points 5.6
16
Strength to Weight: Bending, points 14
37
Thermal Diffusivity, mm2/s 0.22
0.14
Thermal Shock Resistance, points 4.3
40