MakeItFrom.com
Menu (ESC)

5154A-O Aluminum

5154A-O aluminum is 5154A aluminum in the annealed condition. The graph bars on the material properties cards below compare 5154A-O aluminum to: 5000-series alloys (top), all aluminum alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.

Mechanical Properties

Brinell Hardness

58

Elastic (Young's, Tensile) Modulus

68 GPa 9.9 x 106 psi

Elongation at Break

19 %

Fatigue Strength

100 MPa 15 x 103 psi

Poisson's Ratio

0.33

Shear Modulus

26 GPa 3.7 x 106 psi

Shear Strength

150 MPa 21 x 103 psi

Tensile Strength: Ultimate (UTS)

240 MPa 34 x 103 psi

Tensile Strength: Yield (Proof)

96 MPa 14 x 103 psi

Thermal Properties

Latent Heat of Fusion

400 J/g

Maximum Temperature: Mechanical

190 °C 370 °F

Melting Completion (Liquidus)

650 °C 1190 °F

Melting Onset (Solidus)

600 °C 1100 °F

Specific Heat Capacity

900 J/kg-K 0.22 BTU/lb-°F

Thermal Conductivity

130 W/m-K 75 BTU/h-ft-°F

Thermal Expansion

24 µm/m-K

Electrical Properties

Electrical Conductivity: Equal Volume

32 % IACS

Electrical Conductivity: Equal Weight (Specific)

110 % IACS

Otherwise Unclassified Properties

Base Metal Price

9.5 % relative

Density

2.7 g/cm3 170 lb/ft3

Embodied Carbon

8.8 kg CO2/kg material

Embodied Energy

150 MJ/kg 66 x 103 BTU/lb

Embodied Water

1180 L/kg 140 gal/lb

Common Calculations

Resilience: Ultimate (Unit Rupture Work)

36 MJ/m3

Resilience: Unit (Modulus of Resilience)

68 kJ/m3

Stiffness to Weight: Axial

14 points

Stiffness to Weight: Bending

51 points

Strength to Weight: Axial

24 points

Strength to Weight: Bending

31 points

Thermal Diffusivity

53 mm2/s

Thermal Shock Resistance

10 points

Alloy Composition

Aluminum (Al)Al 93.7 to 96.9
Magnesium (Mg)Mg 3.1 to 3.9
Manganese (Mn)Mn 0 to 0.5
Silicon (Si)Si 0 to 0.5
Iron (Fe)Fe 0 to 0.5
Chromium (Cr)Cr 0 to 0.25
Titanium (Ti)Ti 0 to 0.2
Zinc (Zn)Zn 0 to 0.2
Copper (Cu)Cu 0 to 0.1
Residualsres. 0 to 0.15

All values are % weight. Ranges represent what is permitted under applicable standards.

Followup Questions

Further Reading

EN 754-2: Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Mechanical properties

Aluminum: Properties and Physical Metallurgy, John E. Hatch (editor), 1984

EN 755-2: Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Mechanical properties

EN 485-2: Aluminium and aluminium alloys. Sheet, strip and plate. Mechanical properties

ASM Specialty Handbook: Aluminum and Aluminum Alloys, J. R. Davis (editor), 1993

ISO 6361-2: Wrought aluminium and aluminium alloys - Sheets, strips and plates - Part 2: Mechanical properties

EN 573-3: Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products