MakeItFrom.com
Menu (ESC)

ASTM A732 Grade 14Q Cast Steel

ASTM A732 grade 14Q is a type of ASTM A732 cast steel. Cited properties are appropriate for the quenched and tempered condition. The graph bars on the material properties cards below compare ASTM A732 grade 14Q to: cast alloy steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.

Mechanical Properties

Brinell Hardness

350

Elastic (Young's, Tensile) Modulus

190 GPa 27 x 106 psi

Elongation at Break

7.0 %

Fatigue Strength

530 MPa 77 x 103 psi

Poisson's Ratio

0.29

Shear Modulus

73 GPa 11 x 106 psi

Tensile Strength: Ultimate (UTS)

1150 MPa 170 x 103 psi

Tensile Strength: Yield (Proof)

900 MPa 130 x 103 psi

Thermal Properties

Latent Heat of Fusion

260 J/g

Maximum Temperature: Mechanical

420 °C 780 °F

Melting Completion (Liquidus)

1460 °C 2650 °F

Melting Onset (Solidus)

1410 °C 2580 °F

Specific Heat Capacity

470 J/kg-K 0.11 BTU/lb-°F

Thermal Conductivity

39 W/m-K 22 BTU/h-ft-°F

Thermal Expansion

13 µm/m-K

Electrical Properties

Electrical Conductivity: Equal Volume

7.5 % IACS

Electrical Conductivity: Equal Weight (Specific)

8.6 % IACS

Otherwise Unclassified Properties

Base Metal Price

2.8 % relative

Density

7.8 g/cm3 490 lb/ft3

Embodied Carbon

1.6 kg CO2/kg material

Embodied Energy

21 MJ/kg 8.9 x 103 BTU/lb

Embodied Water

51 L/kg 6.1 gal/lb

Common Calculations

Resilience: Ultimate (Unit Rupture Work)

75 MJ/m3

Resilience: Unit (Modulus of Resilience)

2180 kJ/m3

Stiffness to Weight: Axial

13 points

Stiffness to Weight: Bending

24 points

Strength to Weight: Axial

41 points

Strength to Weight: Bending

31 points

Thermal Diffusivity

10 mm2/s

Thermal Shock Resistance

34 points

Alloy Composition

Iron (Fe)Fe 95.6 to 98
Manganese (Mn)Mn 0.65 to 1.0
Chromium (Cr)Cr 0.4 to 0.7
Nickel (Ni)Ni 0.4 to 0.7
Silicon (Si)Si 0.2 to 0.8
Carbon (C)C 0.25 to 0.35
Copper (Cu)Cu 0 to 0.5
Molybdenum (Mo)Mo 0.15 to 0.25
Tungsten (W)W 0 to 0.1
Sulfur (S)S 0 to 0.045
Phosphorus (P)P 0 to 0.040

All values are % weight. Ranges represent what is permitted under applicable standards.

Followup Questions

Similar Alloys

Further Reading

ASTM A732: Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures

Manufacture and Uses of Alloy Steels, Henry D. Hibbard, 2005

Ferrous Materials: Steel and Cast Iron, Hans Berns and Werner Theisen, 2008

Steels: Processing, Structure, and Performance, 2nd ed., George Krauss, 2015