Annealed 440A Stainless Steel
Annealed AISI 440A is AISI 440A stainless steel in the annealed condition. The graph bars on the material properties cards below compare annealed AISI 440A to: wrought martensitic stainless steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Elastic (Young's, Tensile) Modulus
200 GPa 28 x 106 psi
Elongation at Break
20 %
Fatigue Strength
270 MPa 39 x 103 psi
Poisson's Ratio
0.28
Shear Modulus
77 GPa 11 x 106 psi
Shear Strength
450 MPa 66 x 103 psi
Tensile Strength: Ultimate (UTS)
730 MPa 110 x 103 psi
Tensile Strength: Yield (Proof)
420 MPa 60 x 103 psi
Thermal Properties
Latent Heat of Fusion
280 J/g
Maximum Temperature: Corrosion
400 °C 750 °F
Maximum Temperature: Mechanical
760 °C 1400 °F
Melting Completion (Liquidus)
1480 °C 2700 °F
Melting Onset (Solidus)
1370 °C 2500 °F
Specific Heat Capacity
480 J/kg-K 0.12 BTU/lb-°F
Thermal Conductivity
23 W/m-K 13 BTU/h-ft-°F
Thermal Expansion
10 µm/m-K
Electrical Properties
Electrical Conductivity: Equal Volume
2.5 % IACS
Electrical Conductivity: Equal Weight (Specific)
2.9 % IACS
Otherwise Unclassified Properties
Base Metal Price
9.0 % relative
Density
7.7 g/cm3 480 lb/ft3
Embodied Carbon
2.2 kg CO2/kg material
Embodied Energy
31 MJ/kg 13 x 103 BTU/lb
Embodied Water
120 L/kg 14 gal/lb
Common Calculations
PREN (Pitting Resistance)
18
Resilience: Ultimate (Unit Rupture Work)
120 MJ/m3
Resilience: Unit (Modulus of Resilience)
440 kJ/m3
Stiffness to Weight: Axial
14 points
Stiffness to Weight: Bending
25 points
Strength to Weight: Axial
26 points
Strength to Weight: Bending
23 points
Thermal Diffusivity
6.2 mm2/s
Thermal Shock Resistance
26 points
Alloy Composition
| Fe | 78.4 to 83.4 | |
| Cr | 16 to 18 | |
| C | 0.6 to 0.75 | |
| Mn | 0 to 1.0 | |
| Si | 0 to 1.0 | |
| Mo | 0 to 0.75 | |
| P | 0 to 0.040 | |
| S | 0 to 0.015 |
All values are % weight. Ranges represent what is permitted under applicable standards.
Followup Questions
Further Reading
ASTM A276: Standard Specification for Stainless Steel Bars and Shapes
Creep-Resistant Steels, Fujio Abe et al. (editors), 2008
Advanced Materials in Automotive Engineering, Jason Rowe (editor), 2012
ASTM A959: Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
Corrosion of Stainless Steels, A. John Sedriks, 1996
ASM Specialty Handbook: Stainless Steels, J. R. Davis (editor), 1994
Advances in Stainless Steels, Baldev Raj et al. (editors), 2010