MakeItFrom.com
Menu (ESC)

Cold Worked (+C700) 1.4567 Stainless Steel

EN 1.4567 +C700 steel is EN 1.4567 stainless steel in the cold worked (strain hardened) condition. The graph bars on the material properties cards below compare EN 1.4567 +C700 steel to: wrought austenitic stainless steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.

Mechanical Properties

Brinell Hardness

240

Elastic (Young's, Tensile) Modulus

190 GPa 28 x 106 psi

Elongation at Break

22 %

Fatigue Strength

260 MPa 38 x 103 psi

Impact Strength: V-Notched Charpy

91 J 67 ft-lb

Poisson's Ratio

0.28

Shear Modulus

76 GPa 11 x 106 psi

Shear Strength

490 MPa 71 x 103 psi

Tensile Strength: Ultimate (UTS)

780 MPa 110 x 103 psi

Tensile Strength: Yield (Proof)

390 MPa 57 x 103 psi

Thermal Properties

Latent Heat of Fusion

290 J/g

Maximum Temperature: Corrosion

420 °C 780 °F

Maximum Temperature: Mechanical

930 °C 1710 °F

Melting Completion (Liquidus)

1410 °C 2570 °F

Melting Onset (Solidus)

1370 °C 2500 °F

Specific Heat Capacity

480 J/kg-K 0.11 BTU/lb-°F

Thermal Conductivity

11 W/m-K 6.5 BTU/h-ft-°F

Thermal Expansion

17 µm/m-K

Electrical Properties

Electrical Conductivity: Equal Volume

2.4 % IACS

Electrical Conductivity: Equal Weight (Specific)

2.7 % IACS

Otherwise Unclassified Properties

Base Metal Price

16 % relative

Density

7.8 g/cm3 490 lb/ft3

Embodied Carbon

3.1 kg CO2/kg material

Embodied Energy

43 MJ/kg 19 x 103 BTU/lb

Embodied Water

150 L/kg 18 gal/lb

Common Calculations

PREN (Pitting Resistance)

19

Resilience: Ultimate (Unit Rupture Work)

150 MJ/m3

Resilience: Unit (Modulus of Resilience)

400 kJ/m3

Stiffness to Weight: Axial

14 points

Stiffness to Weight: Bending

25 points

Strength to Weight: Axial

27 points

Strength to Weight: Bending

24 points

Thermal Diffusivity

3.0 mm2/s

Thermal Shock Resistance

17 points

Alloy Composition

Iron (Fe)Fe 63.3 to 71.5
Chromium (Cr)Cr 17 to 19
Nickel (Ni)Ni 8.5 to 10.5
Copper (Cu)Cu 3.0 to 4.0
Manganese (Mn)Mn 0 to 2.0
Silicon (Si)Si 0 to 1.0
Nitrogen (N)N 0 to 0.1
Phosphorus (P)P 0 to 0.045
Carbon (C)C 0 to 0.040
Sulfur (S)S 0 to 0.015

All values are % weight. Ranges represent what is permitted under applicable standards.

Followup Questions

Further Reading

EN 10269: Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties

EN 10088-1: Stainless steels - Part 1: List of stainless steels

Corrosion of Austenitic Stainless Steels: Mechanism, Mitigation and Monitoring, H. S. Khatak and B. Raj (editors), 2002

Austenitic Stainless Steels: Microstructure and Mechanical Properties, P. Marshall, 1984

Advances in Stainless Steels, Baldev Raj et al. (editors), 2010