Half-Hard (H02) C78200 Nickel Silver
H02 C78200 nickel silver is C78200 nickel silver in the H02 (half hard) temper. The graph bars on the material properties cards below compare H02 C78200 nickel silver to: wrought copper-nickels (top), all copper alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Elastic (Young's, Tensile) Modulus
110 GPa 16 x 106 psi
Elongation at Break
12 %
Poisson's Ratio
0.32
Rockwell B Hardness
78
Rockwell Superficial 30T Hardness
69
Shear Modulus
43 GPa 6.2 x 106 psi
Shear Strength
320 MPa 47 x 103 psi
Tensile Strength: Ultimate (UTS)
480 MPa 69 x 103 psi
Tensile Strength: Yield (Proof)
430 MPa 63 x 103 psi
Thermal Properties
Latent Heat of Fusion
190 J/g
Maximum Temperature: Mechanical
160 °C 320 °F
Melting Completion (Liquidus)
1000 °C 1830 °F
Melting Onset (Solidus)
970 °C 1780 °F
Specific Heat Capacity
390 J/kg-K 0.092 BTU/lb-°F
Thermal Conductivity
48 W/m-K 28 BTU/h-ft-°F
Thermal Expansion
19 µm/m-K
Electrical Properties
Electrical Conductivity: Equal Volume
11 % IACS
Electrical Conductivity: Equal Weight (Specific)
12 % IACS
Otherwise Unclassified Properties
Base Metal Price
28 % relative
Density
8.4 g/cm3 520 lb/ft3
Embodied Carbon
3.3 kg CO2/kg material
Embodied Energy
52 MJ/kg 22 x 103 BTU/lb
Embodied Water
310 L/kg 37 gal/lb
Common Calculations
Resilience: Ultimate (Unit Rupture Work)
55 MJ/m3
Resilience: Unit (Modulus of Resilience)
840 kJ/m3
Stiffness to Weight: Axial
7.4 points
Stiffness to Weight: Bending
19 points
Strength to Weight: Axial
16 points
Strength to Weight: Bending
16 points
Thermal Diffusivity
15 mm2/s
Thermal Shock Resistance
16 points
Alloy Composition
| Cu | 63 to 67 | |
| Zn | 20.2 to 28.5 | |
| Ni | 7.0 to 9.0 | |
| Pb | 1.5 to 2.5 | |
| Mn | 0 to 0.5 | |
| Fe | 0 to 0.35 | |
| res. | 0 to 0.5 |
All values are % weight. Ranges represent what is permitted under applicable standards.
Followup Questions
Further Reading
Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, ASM Handbook vol. 2, ASM International, 1993
CRC Materials Science and Engineering Handbook, 4th ed., James F. Shackelford et al. (editors), 2015