MakeItFrom.com
Menu (ESC)

High Shearability (+S) 1.5026 Steel

EN 1.5026 +S steel is EN 1.5026 steel in the shearability treated condition. The graph bars on the material properties cards below compare EN 1.5026 +S steel to: EN wrought alloy steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.

Mechanical Properties

Brinell Hardness

240

Elastic (Young's, Tensile) Modulus

190 GPa 27 x 106 psi

Poisson's Ratio

0.29

Shear Modulus

72 GPa 10 x 106 psi

Tensile Strength: Ultimate (UTS)

800 MPa 120 x 103 psi

Thermal Properties

Latent Heat of Fusion

280 J/g

Maximum Temperature: Mechanical

400 °C 750 °F

Melting Completion (Liquidus)

1440 °C 2620 °F

Melting Onset (Solidus)

1390 °C 2540 °F

Specific Heat Capacity

480 J/kg-K 0.11 BTU/lb-°F

Thermal Conductivity

47 W/m-K 27 BTU/h-ft-°F

Thermal Expansion

13 µm/m-K

Electrical Properties

Electrical Conductivity: Equal Volume

7.3 % IACS

Electrical Conductivity: Equal Weight (Specific)

8.5 % IACS

Otherwise Unclassified Properties

Base Metal Price

1.9 % relative

Density

7.7 g/cm3 480 lb/ft3

Embodied Carbon

1.5 kg CO2/kg material

Embodied Energy

19 MJ/kg 8.4 x 103 BTU/lb

Embodied Water

46 L/kg 5.4 gal/lb

Common Calculations

Stiffness to Weight: Axial

13 points

Stiffness to Weight: Bending

25 points

Strength to Weight: Axial

29 points

Strength to Weight: Bending

25 points

Thermal Diffusivity

13 mm2/s

Thermal Shock Resistance

24 points

Alloy Composition

Iron (Fe)Fe 96.5 to 97.3
Silicon (Si)Si 1.6 to 2.0
Manganese (Mn)Mn 0.6 to 0.9
Carbon (C)C 0.52 to 0.6
Phosphorus (P)P 0 to 0.025
Sulfur (S)S 0 to 0.025

All values are % weight. Ranges represent what is permitted under applicable standards.

Followup Questions

Further Reading

EN 10089: Hot rolled steels for quenched and tempered springs - Technical delivery conditions

Manufacture and Uses of Alloy Steels, Henry D. Hibbard, 2005

Ferrous Materials: Steel and Cast Iron, Hans Berns and Werner Theisen, 2008

Steels: Processing, Structure, and Performance, 2nd ed., George Krauss, 2015