MakeItFrom.com
Menu (ESC)

Normalized and Tempered (+NT) 1.7335 Steel

EN 1.7335 +NT steel is EN 1.7335 steel in the normalized and tempered condition. The graph bars on the material properties cards below compare EN 1.7335 +NT steel to: EN wrought alloy steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.

Mechanical Properties

Brinell Hardness

160

Elastic (Young's, Tensile) Modulus

190 GPa 27 x 106 psi

Elongation at Break

22 %

Fatigue Strength

220 MPa 32 x 103 psi

Impact Strength: V-Notched Charpy

35 J 26 ft-lb

Poisson's Ratio

0.29

Shear Modulus

73 GPa 11 x 106 psi

Shear Strength

330 MPa 47 x 103 psi

Tensile Strength: Ultimate (UTS)

520 MPa 75 x 103 psi

Tensile Strength: Yield (Proof)

310 MPa 45 x 103 psi

Thermal Properties

Latent Heat of Fusion

250 J/g

Maximum Temperature: Mechanical

430 °C 800 °F

Melting Completion (Liquidus)

1470 °C 2670 °F

Melting Onset (Solidus)

1420 °C 2600 °F

Specific Heat Capacity

470 J/kg-K 0.11 BTU/lb-°F

Thermal Conductivity

44 W/m-K 25 BTU/h-ft-°F

Thermal Expansion

13 µm/m-K

Electrical Properties

Electrical Conductivity: Equal Volume

7.3 % IACS

Electrical Conductivity: Equal Weight (Specific)

8.4 % IACS

Otherwise Unclassified Properties

Base Metal Price

2.8 % relative

Density

7.9 g/cm3 490 lb/ft3

Embodied Carbon

1.6 kg CO2/kg material

Embodied Energy

21 MJ/kg 8.8 x 103 BTU/lb

Embodied Water

52 L/kg 6.2 gal/lb

Common Calculations

PREN (Pitting Resistance)

2.7

Resilience: Ultimate (Unit Rupture Work)

97 MJ/m3

Resilience: Unit (Modulus of Resilience)

260 kJ/m3

Stiffness to Weight: Axial

13 points

Stiffness to Weight: Bending

24 points

Strength to Weight: Axial

18 points

Strength to Weight: Bending

18 points

Thermal Diffusivity

12 mm2/s

Thermal Shock Resistance

15 points

Alloy Composition

Iron (Fe)Fe 96.4 to 98.4
Chromium (Cr)Cr 0.7 to 1.2
Manganese (Mn)Mn 0.4 to 1.0
Molybdenum (Mo)Mo 0.4 to 0.6
Silicon (Si)Si 0 to 0.35
Copper (Cu)Cu 0 to 0.3
Carbon (C)C 0.080 to 0.18
Phosphorus (P)P 0 to 0.025
Nitrogen (N)N 0 to 0.012
Sulfur (S)S 0 to 0.010

All values are % weight. Ranges represent what is permitted under applicable standards.

Followup Questions

Further Reading

EN 10222-2: Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperature properties

EN 10028-2: Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties

EN 10216-2: Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties

Creep-Resistant Steels, Fujio Abe et al. (editors), 2008

Pressure Vessels: External Pressure Technology, 2nd ed., Carl T. F. Ross, 2011

Manufacture and Uses of Alloy Steels, Henry D. Hibbard, 2005

Ferrous Materials: Steel and Cast Iron, Hans Berns and Werner Theisen, 2008

Steels: Processing, Structure, and Performance, 2nd ed., George Krauss, 2015